Elastomer Molding Technology - 2 Day Course
Course Number: AP3511
Date: 10/15/2020 - 10/16/2020
Time: 8:00 AM - 4:30 PM
Location: Akron Polymer Training Center, Akron, OH 44325-5404, U.S.A.
Cost: $800 USD
Instructor: Mr. Terry Chapin
This seminar describes and compares important molding methods (compression, transfer, and injection) for thermosetting elastomers (TSEs) with methods (injection and blow) for thermoplastic elastomers (TPEs). There will be a limited description of mold design for TSEs.
This introductory course will benefit people involved in molding of elastomers, especially those transitioning from molding of one type of elastomer to another. Attendees with primarily a materials-related background will improve their understanding of molding processes and the effect of mold design on molded products. Process and design managers will better understand the effect and importance of these factors on the overall molding operation.
In addition, the course considers elastomer selection, varied deflashing techniques, elastomer processing factors, elastomer part tolerancing, molded article dimensional variations and design for manufacturability (DFM). DFM difficulties and examples are described. Also included is a discussion of the "Beaumont Melt Flipper", correcting mold problems, importance of mold vents and gates, vacuum molding, as well as trouble shooting the molding process.
Attendees will improve their understanding of molding behavior of TSEs and thus improve and better control their elastomer molding operations. The interdisciplinary approach used will assist them in understanding molding as an integrated operation consisting of materials, processes and design. Participants are encouraged to discuss current molding problems for class input.
Information from the books, Elastomer Molding Technology and Rubber Molding Principles, will be used in conjunction with the seminar.
Terry Chapin received his B.S. from Youngstown State University in Youngstown, Ohio in June 1980. He majored in mechanical engineering and minored in math and civil engineering.
After 33 years, he retired from Delphi as a senior materials engineer, working primarily in the area of silicones, elastomer parts and foam products development. He was previously senior rubber technical and cost leader at Delphi, after working as a tool engineer for rubber and plastic molds at the Delphi Packard Division for more than 20 years. He is now working for himself as a consultant and instructor. His new company is Elastomeister, and his position is Rubber Technologist.
Terry has been involved in the rubber industry for more than 30 years, working with rubber companies all over the world. He has held previous engineering positions at Paxson Machine Company, EMCO Wheaton and Commercial Shearing. He holds two U.S. patents. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for more than 25 years.
APTC Elastomer Molding Technology Course
- Rubber Material Overview
- Rubber Material Flow
- Rubber ASTM Material Designations
- Rubber Molding Methods
- Other Types of Molding
- Rubber Material Process Overview
- Overview of Presses and Molding Equipment
- Deflashing Techniques
- Processing of Rubber
- Design for Manufacturability
- Tolerances for Rubber Parts
- Mold Debug
- Vacuum Molding
- Beaumont Melt Flipper
- Troubleshooting the Rubber Molding Process