Alumni Dissertations and Theses
Click on the column headings below to sort the table.
To search for specific alumni or dissertations, press CTRL+F or COMMAND+F to use your browser's search feature.
| Last Name | First Name | Degree | Year | Thesis/Dissertation |
|---|---|---|---|---|
| Acharya | Sunil | Ph.D. | 2005 | Micromechanics of Asperity Interaction in Wear - A Numerical Approach |
| Adames | Juan | Ph.D. | 2007 | Characterization of Polymeric Binders for Metal Injection Molding (MIM) Process |
| Adebayo | Gbolarumi | Ph.D. | 2001 | Design, Validation and Implementation of On-Line Measurement Techniques to Study the Phase Behavior of Partially Miscible PMMA/PaMSAN Blends Under Quiescent and Flow Conditions, and Application to Filled-PVC in Quiescent Mode |
| Adewale | Ajayi | Ph.D. | 1993 | Experimental and Theoretical Isothermal Flow Studies in Modular Intermeshing Counter-Rotating Twin Screw Extruders |
| Adewale | Kolapo | Ph.D. | 1996 | Modeling of Melt Flow Instabilities of High Molecular Weight Polymer with Narrow Molecular Weight Distribution |
| Adwani | Sunil | M.S. | 2003 | The Use of Excimer Laser Evaluation of Processing Effects in Injection Molded PS and PC |
| Agarwal | Sheel | M.S. | 2000 | Development and Application of Lambourn Type Abrasion Tester on NR and SBR Blends |
| Agrawal | Aparna | Ph.D. | 2023 | Multifunctional Aerogels through Structural and Morphology Control: Additive Manufacturing and Coatings Aided Approach |
| Ahmad Nazir | Nadzrinahamin | Ph.D. | 2011 | Modification and Characterization of Nafion Perfluorinated Ionomer Membrane for Polymer Electrolyte Fuel Cells |
| Ahn | Dae Up | Ph.D. | 2007 | Well-Aligned 3-Dimensional Self-Assembly in Block Copolymers and Their Nanotechnological Applications |
| Ahn | Sungtae | Ph.D. | 2003 | The Influence of Additives and Additive Migration on Rheological Properties and Processing of Polymer Melt Compounds |
| Ahn | Yongjin | M.S. | 1994 | Wear of Slipping Wheels |
| Al-Munif | Munif Hamad | M.S. | 2003 | Enhancement of Mechanical Properties of Polyethylene Terephthalate Via In-Situ Compatibilization Process with Linear Low Density Polyethylene Modified with Glycidyl Methacrylate and Organic Clay |
| Al-Salloum | Mohammed | M.S. | 2021 | Use of Pyrolyzed Soybean Hulls as Filler in Polyamide-6 |
| Al-Yamani | Faisal | M.S. | 2005 | A Route to Enhanced Intercalation in Rubber Silicate Nanocomposites |
| Albehaijan | Hamad | M.S. | 2017 | Approaches to Enhance Filler-Polymer Interactions and Cure Properties of Rubber Compounds |
| Albehaijan | Hamad | Ph.D. | 2020 | Approaches Toward Optimum Mechanoelectrical and Electrochemical Performance of Ion Containing Polymer Composites |
| Almazrou | Yaser | M.S. | 2018 | Effects of Mobile Nanoparticles on the Morphology and Topography of Polysulfone/Polyimide Thin Films |
| Almazrou | Yaser | Ph.D. | 2023 | Development and Optimization of Flexoelectric and Electrochemical Performance of Multifunctional Polymer Electrolyte Membranes for Energy Harvesting and Storage |
| Alrashed | Maher | M.S. | 2013 | Polyurethane/Polysiloxane Ceramer Nanocomposite Coating for Aircraft Applications |
| Alrashed | Maher | Ph.D. | 2017 | Organic/Inorganic Hybrid Coatings for Anticorrosion Applications |
| Alyamac | Elif | Ph.D. | 2009 | Self-Stratifying Coatings |
| Ammar | Ali | M.S. | 2012 | The Morphology and Mechanical Properties of Polysulfone/Polyimide Nanocomposite Films |
| Ammar | Ali | Ph.D. | 2018 | Reduction of Graphene Oxide using Microwave and its Effect on Polymer Nanocomposites Properties |
| Ariza | Nathan | M.S. | 2018 | An Investigation on Compressive Mechanical Properties of Syndiotactic Polystyrene Gels and the Conductive Behavior of Syndiotactic Polystyrene Ionogels |
| Asiri | Abdulaziz | M.S. | 2003 | A Novel Economical Method to Improve the Toughness of Carbon/Epoxy Long Fiber Components by the Integration of Carbon/Epoxy Tow Loops Core |
| Asti | Kevin | M.S. | 2016 | Evaluation of the Efficacy of Zinc Sulfonated EPDM Ionomer as an Impact Modifier for Polyamide6 |
| Aussawasathien | Darunee | Ph.D. | 2006 | Electrospun Conducting Nanofiber-Based Materials and Their Characterizations: Effects of Fiber Characteristics on Properties and Applications |
| Ayrom Keuchel | Haleh | Ph.D. | 1997 | Development of Spatial Structural Hierarchy in Injection Molded Isotactic Polypropylene |
| Ayyer | Ravishankar | M.S. | 2003 | Rheology of Polyamide-6/Montmorillonite Based Silicate Polymer/Layered Nanocomposites |
| Azari | Arsalan | M.S. | 1988 | Shear-Free Squeezing Flow of Polymer Melts - Equibiaxial Stretching |
| Azmoudeh | Mohammad | M.S. | 1992 | Synergistic Processing Strategies in Forging of Polymer-Metal Powder Mixtures |
| Babrowicz | Robert | M.S. | 1989 | The Effect of Polystyrene Domain Structure on the Rheological Behavior and Adhesive Performance in a Styrene-Isoprene-Styrene Pressure Sensitive Adhesive |
| Baena | Johanna | Ph.D. | 2006 | Processing and Kinetic Studies of the Reactive Blends of Poly(vinylchloride) and Thermoplastic Polyurethanes |
| Bahl | Kushal | M.S. | 2010 | Optimum Process Conditions for Production of Thermally Conductive Polymer Compounds Using Boron Nitride |
| Bahl | Kushal | Ph.D. | 2014 | Towards Development of Lignin Reinforced Elastomeric Compounds with Reduced Energy Dissipation |
| Bai | Lan | M.S. | 2001 | The Effects of Filler Volume Fraction and Film Thickness on Resistivity of Conductive Adhesives |
| Bajpai | Vardhan | Ph.D. | 2005 | Syntheses, Characterization and Applications of Micro-/Nano-Structured Conducting Polymers and Carbon Nanotubes |
| Bakan | Murat | Ph.D. | 2015 | Development of Polymer Resin-based Wet Friction Sheet Materials and Understanding their Interactions with Automatic Transmission Fluids |
| Ban | Kyun Ha | Ph.D. | 2008 | Mechanism and Significance of Slip and New Mixing Elements During Flow in Modular Intermeshing Co-Rotating Twin Screw Extruders |
| Bandyopadhyay | Diya | Ph.D. | 2012 | Controlling Polymer Thin Film Instabilities via Tuning of Polymer-Substrate Interactions and Suppression of Capillary Waves |
| Bang | Dae-Suk | Ph.D. | 1996 | Theoretical and Experimental Flow Studies in Modular Tangential Counter-Rotating Twin Screw Extruders |
| Bas | Gamze | Ph.D. | 2017 | Predictive Modeling for Rate Dependent Toughened-Adhesive Behavior During Impact |
| Bas | Serkan | Ph.D. | 2009 | Synthesis of Hybrid Latexes and Polymerization Kinetics of Functional Latexes |
| Basak | Sayan | Ph.D. | 2023 | Structure-Property Relationships of High CIS 1.4 Polybutadiene Based Shape Memory Polymers |
| Basutkar | Monali | Ph.D. | 2018 | Directed Self-Assembly of Nanostructured Block Copolymer Thin Films via Dynamic Thermal Annealing |
| Batra | Saurabh | Ph.D. | 2014 | Field Assisted Self Assembly for Preferential Vertical Alignment of Particles and Phases using a Novel Roll-to-Roll Processing Line |
| Bawiskar | Santosh | M.S. | 1992 | Simulation of Heat Transfer: Warpage and Residual Stresses in Rotational Molding |
| Bawiskar | Santosh | Ph.D. | 1997 | Experimental and Theoretical Investigation of Solids Conveying, Melting and Global Behavior in Self Wiping Co-Rotating Twin Screw Extruders |
| Beers | Adam | M.S. | 1999 | Deformation Behavior and Structural Development of Polyethylene Naphthalate/Polycarbonate Blends |
| Belatreche | Mehdi Jean | M.S. | 2002 | A Theoretical and Experimental Study of Liquid Crystalline Polymers |
| Beltran Osuna | Angela | M.S. | 2011 | Evaluation of Antifouling Materials Based on Silica Gels |
| Benavides Gonzalez | Rafael | Ph.D. | 2013 | Gas Jet Process for Production of Sub-micron Fibers |
| Benes | Michal | M.S. | 2002 | Improved Properties of Short Fiber Rubber Composites through Nanoscale Co-reinforcement |
| Bethea | Robert | M.S. | 2014 | The Effects of Carbon Black Reinforcement Systems on Crosslinked Shape Memory Elastomers |
| Bhadauriya | Sonal | Ph.D. | 2019 | Relaxation Behaviour of Patterned Composite Polymer Surfaces and Underlying Compensation Phenomenon |
| Bhaway | Sarang | Ph.D. | 2016 | Fabrication of Block Copolymer Templated Mesoporous Metal Oxide Composites for Energy Storage Applications |
| Bhuva | Nihir | M.S. | 2003 | Polymer Blends Comprising Nano-Clay for Enhanced Permeation Barrier in Packaging Applications |
| Bicakci Jenkins | Sirarpi | Ph.D. | 2000 | Miscibility, Uniaxial Deformation Behavior and Annealing Studies in Binary and Ternary Blends of Poly(ethylene naphthalate), Poly(ether imide), and Poly(ether ether ketone) |
| Birman | Vyacheslav | Ph.D. | 1999 | Studies of High Deborah Number Flows of Polymer in Channels and Pipes |
| Boles | David | M.S. | 1994 | The Effect of Mold Cavity Geometry on Orientation Development in Injection Molding of Thermotropic Liquid Crystalline Polymers |
| Bora | Sunil | M.S. | 1992 | Development of a Device for Obtaining Uniform Thickness in Thermoforming of Barrier Materials |
| Bouscher | Robert | Ph.D. | 2021 | Advancements in Powder Coating Processing and in Real-Time Film Formation Analysis of Thermoset Coatings |
| Brenno | Steve | M.S. | 2004 | A Process Route to the Synthesis of Polymer Matrix Nanocomposites with Mixed-Geometry Inclusions |
| Brostowitz | Nicole | Ph.D. | 2014 | Shape Memory Rubber Bands and Supramolecular Ionic Copolymer |
| Buddhiranon | Sasiwimon | Ph.D. | 2012 | Phytochemical Modification of Biodegradable/Biocompatible Polymer Blends with Improved Immunological Responses |
| Bumm | Sug Hun | Ph.D. | 2010 | Mixing Studies and Simulation of Compounding Chopped Fiber and Silica Filler into Thermoplastics in a Modular Co-Rotating Twin Screw Extruder |
| Cai | Feng | M.S. | 1992 | Rubber Modified Copolyester Thermoplastic Elastomer |
| Cai | Liang | M.S. | 2016 | Graft Copolymer Aerogels from Sulfonated Syndiotactic Polystyrene Functionalized with a Quaternary Phosphonium-containing Raft Agent |
| Cai | Zhuoyun | M.S. | 2018 | Influence of Applied Voltage on Dewetting of Polymer Thin Films |
| Cano | Camilo | Ph.D. | 2005 | Polyimide Microstructures from Powdered Precursors: Phenomenological and Parametric Studies on Particle Inflation |
| Cao | Du | M.S. | 1995 | A Study of Elastic Recovery of Rubber Vulcanizates Within Very Short Time Intervals for Dynamic Sealing Applications |
| Cao | Feina | Ph.D. | 2008 | Shape Memory Polyurethane Nanocomposites |
| Cao | Jinwei | M.S. | 2014 | Phase Diagram Approach to Control of Ionic Conductivity and Electrochemical Stability of Solid Polymer Electrolyte Membrane for Li-Ion Battery Application |
| Cao | Jinwei | Ph.D. | 2018 | Bioelectricity Inspired Polymer Electrolyte Membranes for Sensing and Energy Harvesting Applications |
| Cao | Yuanmei | Ph.D. | 2012 | Antireflective Polyimide Based Films |
| Cardenas | Salvador | M.S. | 2000 | Effect of Glass Fibers on the Behavior of LCP/PEI Blends |
| Carrillo | Antonio | Ph.D. | 2008 | Residual Stresses and Birefringence in Gas-Assisted Injection Molding of Amorphous Polymers: Simulation and Experiment |
| Catignani | Umberto | M.S. | 1996 | Molecular Weight Effect on Growth, Nucleation, and Crystallization Rates of I-PP and Predictions of Morphology and Crystallization During Quenching |
| Cavak | Murat | M.S. | 1999 | Fatigue Strength Studies in Polyvinyl Chloride Pipe Joints |
| Cha | Jae Hyug | Ph.D. | 2001 | Polymer Modification with Various Monomers in a Batch Mixer and a Twin Screw Extruder: Experiment and Kinetic Modeling |
| Chai | Qinyuan | M.S. | 2013 | Synthesis and Characterization of Ionically Crosslinked Networks |
| Chakraborty | Ruby | Ph.D. | 2008 | Development of Novel Cycloaliphatic Siloxanes for Thermal and UV-Curable Applications |
| Chamulitrat | Sutin | M.S. | 1993 | Dynamic Vulcanization of Thermoplastic Copolyester Elastomer/Nitrile Rubber Blends: Effect of Curing System |
| Chandrasekaran | Neelakandan | Ph.D. | 2010 | Miscibility, Morphology and Biocompatibility Studies of Novel Hemodialysis Membranes with Enhanced Anti-Oxidant and Anti-Inflammatory Properties |
| Chang | Do-Hoon | Ph.D. | 2000 | Comparison of Reactive Extrusion in Different Continuous Mixing Machines |
| Chang | I-Ta | Ph.D. | 2012 | Excimer Laser Ablation of Polymer-Clay Nanocomposites |
| Chang | Ming-Chi | M.S. | 1996 | Miscibility Phase Diagrams of the Mixtures of Side-On Side-Chain Liquid Crystalline Polymers and Low Molar Mass Liquid Crystals |
| Chang | Sukky | Ph.D. | 1997 | Effect of Chemical Structure on Phase Transition-Rheology-Morphology Relationships in Main-Chain Liquid-Crystalline Polymers |
| Chang | Teng | Ph.D. | 2015 | Studies of Genistein Modified Poly(ether sulfone)/Poly(vinyl pyrrolidone) and Poly(vinyl chloride)/Epoxidized Soybean Oil Blends with Enhanced Blood-compatibility for Biomedical Applications |
| Chang | Young-Wook | Ph.D. | 1993 | Internal Fracture of Rubber Blocks |
| Chapa Garza | Jose | M.S. | 2013 | A Comparative Study of the Morphology of Flow and Spin Coated P3HT:PCBM Films |
| Chen | Cheng-Chung | Ph.D. | 1992 | Influence of Compatibilizers on Morphological and Mechanical Properties of Polymer Blends |
| Chen | Chiu-Yen | M.S. | 1993 | Characterization of Phase Morphologies and Mechanical Properties of Blends of Isotactic Polypropylene and Ethylene Propylene Diene Terpolymer |
| Chen | Haifeng | M.S. | 1996 | Fatigue Strength Studies in Polyethylene Pipe Joints |
| Chen | Hongyan | M.S. | 2008 | Simulations of Shearing Rheology of Thermotropic Liquid Crystalline Polymers |
| Chen | Jianhua | Ph.D. | 1995 | Isothermal Thickening and Thinning Processes in Low-Molecular-Mass Poly(ethylene oxide) Fractions Crystallized From the Melt |
| Chen | Keke | Ph.D. | 2019 | Roll-to-Roll Manufacturing and Real-Time Characterization of Bio-Functional Polymers |
| Chen | Long | M.S. | 2013 | Self Stratifying Coatings |
| Chen | Po Yun | M.S. | 2020 | Role of Ionic Liquid in Electroactive Polymer Electrolyte Membrane for Energy Harvesting and Storage |
| Chen | Shide | M.S. | 1991 | Miscibility and Phase Segregation Studies in Poly-p-phenylene Denzobisoxazole/Polyamides Molecular Composites |
| Chen | Wenhe | M.S. | 2019 | Tribological Interactions between Virgin Hair Fibers at Nanoscale |
| Chen | Xiaocheng | M.S. | 2017 | Synthesis of 10-Carboxy-N-Decyl-N, N'-Dimethydecyl-1-Ammonium Bromide as Organogelator |
| Chen | Yan | M.S. | 2014 | Investigation of Single and Double Network Gels by Maximum Bubble Pressure Rheology |
| Chen | Ying | M.S. | 2013 | Simple Fabrication of Hierarchical Multiscale Patterned Flexible PDMS Film and Ice-retarding Property Study |
| Chen | Ying | Ph.D. | 2017 | Patterning Elastomer, Thermoplastics and Shape Memory Material by UV Lithography and Soft Lithography |
| Chen | Yuxuan | M.S. | 2015 | Morphology Development of Block Copolymer and Homopolymer Blend Films |
| Chen | Zhiyuan | M.S. | 2018 | Novel All-Solid-State Asymmetric Supercapacitors with Metal Selenides Electrodes and Highly Ionic-Conductive Gel Electrolyte |
| Cheng | Yizi | M.S. | 2017 | The Decoupling Behavior between Segmental Dynamics and Conductivity in Polymerized Ionic Liquids |
| Chidambaram | Anand | M.S. | 1995 | Reactive Blending of Waste Rubber with Thermoplastics |
| Chittavanich | Pongsith | M.S. | 2009 | Pigmented UV-Curable Alkyd |
| Chiu | Fang-Chyou | M.S. | 1991 | Basic Studies of Miscibility and Interdiffusion of Vinyl Chloride Polymers and Poly(e-caprolactone) Blends |
| Chiu | Hao-Wen | M.S. | 1995 | Phase Behavior in Mixtures of Side-Chain Liquid Crystalline Polymers and Low Molar Mass Liquid Crystals |
| Chiu | Hao-Wen | Ph.D. | 1998 | Phase Equilibria and Self-Organizing Behavior of Side-Chain Liquid Crystalline Polymer Mixtures |
| Cho | Jae Whan | Ph.D. | 1998 | Development of Phase Morphology in Blending for Modular Co-rotating and Counter-Rotating Twin Screw Extruders |
| Cho | Myung Ho | Ph.D. | 1991 | Structure Development and Deformation Mechanism During Biaxial Stretching of Gelation Crystallized Ultrahigh Molecular Weight Polyethylene Films |
| Cho | Szu-Hao | Ph.D. | 2020 | Facile and Fast Fabricatiion of Functional Thin Films via Polyelectrolyte Layer-by-Layer Assembly |
| Choi | Cheol-Ho | Ph.D. | 2000 | Comparative Study of Structure Development in Melt Processing (polyethylene and isotactic polyolefins: polypropylene, polybutylene and poly-4-methylpentene-1) |
| Choi | Dongman | Ph.D. | 2002 | Structure Development of Polypropylenes of Varying Stereo Forms and Tacticity in Melt Spinning, Tubular Blown Film Extrusion and Injection Molding |
| Choi | Jae Hyuck | M.S. | 1999 | Synthesis of Side Chain Liquid Crystalline Polymer and Phase Separation Behavior and Phase Morphology of LCP/K-21 Mixtures |
| Choi | Jaesun | Ph.D. | 2013 | Ultrasonically Aided Extrusion of Rubber Nanocomposites and Rubber Blends |
| Choi | Jonghan | Ph.D. | 2001 | A Study of Structure Evolution During Deformation and Subsequent Heat-Setting Process in Poly(ethylene terephthalate) and Poly(ether imide) Binary Miscible Blends |
| Choi | Kyungwoo | Ph.D. | 2001 | Processing and Characterization of a Petroleum Isotropic Pitch, a Synthetic Mesophase Pitch, and their Blends for the Preparation of Carbon Fibers and Moldings |
| Choi | Soobum | Ph.D. | 2003 | Rheology, Phase Transition and Morphology of ABA-Type and ABC-Type Triblock Copolymers |
| Chu | Lih-Long | M.S. | 1991 | Experiments and Analysis of Polymerization of Methyl Methacrylate in a Model Twin-Screw Extruder |
| Chu | Lih-Long | Ph.D. | 1995 | Flow Analysis of Polymerization in a Model Twin Screw Extruder |
| Chu | Ming-Hou | M.S. | 1990 | Deformation Behavior and Dynamic Filler-Rubber Interaction of Poly(ethyl Acrylate) and Filled Compounds |
| Chun | Hyunaee | Ph.D. | 1997 | Effect of Molecular Characteristics on Strength of Elastomer |
| Chun | Seung Bum | Ph.D. | 1999 | Morphology of Ternary Polymer Blends Containing a Block Copolymer as Compatibilizing Agent |
| Chung | Oansuk | Ph.D. | 1998 | The Effects of Polymer Selection and Dynamic Vulcanization on the Morphology and Properties of Rubber/Plastic Blends |
| Churdpunt Ruksakulpiwat | Yupaporn | Ph.D. | 1999 | Quiescent and Shear-Induced Crystallization of Ziegler-Natta and Metallocene Based Isotactic Polypropylenes |
| Cobaj | Anisa | Ph.D. | 2019 | The Effects of Urethane Methacrylates on the Film Properties of Acrylic-Urethane Hybrid Latexes |
| Coben | Collin | M.S. | 2020 | Use of Pyrolyzed Soybean Hulls as Fillers in Polyolefins |
| Costantino | Gregory | M.S. | 1995 | Thermal and Pressure Buildup During the Abrasion of Elastomers |
| Cronin | Steven | M.S. | 1998 | The Effect of Composition and Processing Conditions on the Structure Development in Injection Molded Dynamically Vulcanized PP/EPDM Blends |
| Crowder | Matthew | M.S. | 2017 | Rheological Analysis of Uncrosslinked Rubber Compounds and the Characterization of an Apparatus for Forming an Elastomeric Strip |
| Cui | Xiaoyu | M.S. | 2017 | Polycation Reinforced Sulfonated Syndiotactic Polystyrene Gels and Self-Healing Latex Containing Polyelectrolyte Multilayers |
| Dabke | Udayan | M.S. | 2022 | Processing and Engineering Properties of HDPE/Pyrolyzed Soybean Hulls/Carbon Black Composites |
| Dariush | Bahman | M.S. | 1995 | Effect of Fillers on Spin Welding of Polypropylene |
| Das | Pritam | M.S. | 2004 | Internet Controlled Thermoplastic Impregnation of Glass Roving with Pultrusion |
| Dayal | Pratyush | Ph.D. | 2007 | Dynamics and Morphology Development in Electrospinning of Polymer Solutions |
| Demiray | Mehmet | M.S. | 1996 | Effect of Processing Conditions on Crystallinity and Microstructure of Injection Moldings of Polypropylenes of Various Molecular Weights |
| Deng | Guodong | M.S. | 2014 | Self-Assembly of Poly(ethylene oxide)-Block-Poly(ethyl acrylate)-Block-Polystyrene with Phenolic Resins |
| Deng | Guodong | Ph.D. | 2018 | Synthesis and Characterization of Ionically Cross-Linked Networks through the Use of Ion-Pair Comonomer |
| Deng | Jone-Shin | Ph.D. | 1990 | Basic Study of Injection Molding of Rubber Compounds |
| Deshpande | Swati | M.S. | 2000 | Rheological Modeling of Silica Filled SBR |
| Dharaiya | Dhawal | M.S. | 2002 | Studies on Ternary Blends of Polybutylene Terephthalate and Polyamide 6 with Phenoxy Resins |
| Dharaiya | Dhawal | Ph.D. | 2006 | Effects of Nanoclay and Conductive Carbon Black on Morphology Development in Chaotic Mixing of Immiscible Polymers |
| Diao | Bing | M.S. | 1997 | Basic Study of Continuous Ultrasonic Devulcanization of Unfilled Silicone Rubber |
| Diaz Vela | Daniel | Ph.D. | 2018 | Origins and Implications of Translational/Reorientational Decoupling in Bulk and Nanoconfined Glass-Forming Liquids |
| Ding | Ran | M.S. | 1994 | Self-Reinforced Prepregs, Laminates and Injection Moldings of LCP/LCP Blends |
| Ding | Ran | Ph.D. | 1997 | Chemorheology of Filled Rubber Compounds |
| Dirama | Taner | M.S. | 2002 | Processing Behavior of Layered Silicate Nanocomposites in Film Blowing |
| Dolog | Rostyslav | Ph.D. | 2013 | Shape Memory Behavior of Ionomers and Their Compounds |
| Dong | Hui | M.S. | 2015 | Devulcanization of Waste EPDM Rubber and Manufacturing of Polypropylene (PP)/Waste EPDM Thermoplastic Elastomers using Ultrasonically Aided Extrusion |
| Doni | Shashishekhar | M.S. | 2001 | Shear-Induced Migration of Particles in Filled Polymers : Effects on Conductivity and Mechanical Properties |
| Du | Ling | Ph.D. | 2008 | Highly Conductive Epoxy/Graphite Polymer Composite Bipolar Plates in Proton Exchange Membrane (PEM) Fuel Cells |
| Duan | Di | M.S. | 2016 | Organic/Inorganic Epoxy Hybrid Coatings for Anticorrosion Application |
| Duan | Yannan | Ph.D. | 2012 | Fundamental Studies on Polymer and Organic-Inorganic Hybrid Nanoparticles Reinforced Silica Aerogels |
| Duan | Yipin | M.S. | 2017 | Mechanical Properties of Supramolecular Nanocomposite Hydrogels formed by Solution Assembly of Graphene Oxide with Polyelectrolytes |
| Duran | Hatice | Ph.D. | 2004 | Anisotropical Patterned Photopolymerization-Induced Phase Separation of Self-Assembled Nano-Composites with Liquid Crystals and Multi Functional Monomers |
| Dworak | David | Ph.D. | 2005 | Synthesis, Characterization, and Evaluation of Cycloaliphatic Substituted Silane Monomers and Polysiloxanes for Photo-Curable Aerospace Coatings |
| Dziczkowski | Jamie | Ph.D. | 2008 | Advances in Acrylic-Alkyd Hybrid Synthesis and Characterization |
| Dzienis Drum | Krystle | M.S. | 2010 | Mechano-optical Behavior and Structure Development in Nylon MXD6 Films Biaxially Stretched and the Effect on Oxygen Permeability Properties |
| Ebner | Karl | M.S. | 1992 | An Experimental Investigation of Polypropylene Degradation in Different Processing Machines |
| Echeverri | Mauricio | Ph.D. | 2012 | Phase Diagram Approach to Fabricating Electro-Active Flexible Films: Highly Conductive, Stretchable Polymeric Solid Electrolytes and Cholesteric Liquid Crystal Flexible Displays |
| Emami | Fatemesadat | Ph.D. | 2013 | Thermodynamically Consistent Interatomic Potentials for Silica to Design Specifically Binding Peptides: Role of Surface Chemistry, pH, and Amino Acid Sequence |
| Erden | Numan | M.S. | 2009 | Polyurethane-Polybenzoxazine Based Shape Memory Polymers |
| Ertekin | Ayca | Ph.D. | 2008 | Analysis of Wetting, Flow and Final Properties of Resin Transfer Molded Epoxy-Glass Fiber Composites Enriched with Nanoscale Reinforcements |
| Extrand | Charles | Ph.D. | 1990 | Surface Studies of Polymers |
| Famili | Navid | Ph.D. | 1991 | Viscoelastic Modeling of Injection Molding of Thermoplastics |
| Fan | Shaobin | Ph.D. | 2000 | Macroscopic Phase Decomposition in Block Copolymers Driven by Thermooxidative Reactions |
| Fan | Xiyun Serene | Ph.D. | 1991 | Rheological Properties and Model for Particle Filled Polymer Melts |
| Farrell | Erin | Ph.D. | 2021 | Development of Emulsion-Templated Polyimide Aerogel Monoliths and Sheets |
| Fei | Pengzhan | Ph.D. | 2013 | Investigation of a Side-Chain Crystalline Shape Memory Block Copolymer and Maximum Bubble Pressure Rheology of Organogels |
| Feng | Chenrun | M.S. | 2017 | Physical and Electrochemical Investigations of Various Dinitrile Plasticizers in Highly Conductive Polymer Electrolyte Membranes for Lithium Ion Battery Applications |
| Feng | Jiawei | M.S. | 2017 | Compatibility and Shape Memory Effect Study of Maleated Ethylene Propylene Copolymer(MAn-g-EPM)/Fatty Acid Blends |
| Feng | Lei | Ph.D. | 2013 | Synthesis and Characterization of Ionically Bonded Diblock Copolymers |
| Feng | Li | Ph.D. | 2012 | Investigation of the Relationships between the Thermodynamic Phase Behavior and Gelation Behavior of a Series of Tripodal Trisamide Compounds |
| Feng | Wenlai | Ph.D. | 2004 | The Reclaiming of Butyl Rubber and In-Situ Compatibilization of Thermoplastic Elastomer by Powerful Ultrasound |
| Feng | Yixiao | M.S. | 2018 | Zinc Aluminum Phosphate Pigmented Polyurethane/Polysiloxane Coatings for Anticorrosion |
| Festa | Daniel | M.S. | 1993 | The Instrumented Spin Welding of Filled and Unfilled Thermotropic Liquid Crystalline Polymer |
| Fiorentini | Francesca | Ph.D. | 2004 | Fundamentals of Structuring During Mixing and Deformation of Rubber Compounds Studied by Real Time Sensing Techniques |
| Fong | Dinghuei | M.S. | 2005 | Finite Element Analysis of Compressive Stress Relaxation in Ethylene/Acrylic Elastomer |
| Fong | Yat-Pui | M.S. | 1999 | Evaluation of Phase Morphology and Dispersion of Polymer Blends with Ultrasound Waves |
| Fonner | Adam | M.S. | 2019 | An Investigation on Syndiotactic Polystyrene Aerogel Coating of Macroporous Fabric via Dip Coating Method |
| Fotoohi-Ghiam | Farid | M.S. | 1990 | Injection Molding of Polymer Blends |
| Fu | Guopeng | M.S. | 2013 | Molecular Complexation and Phase Diagrams of Urea/Polyethylene Glycol Mixtures |
| Fu | Guopeng | Ph.D. | 2017 | Investigation on Structure-Property Relationships in Highly Ion-Conductive Polymer Electrolyte Membranes for All-Solid-State Lithium Ion Batteries |
| Fu | Qiang | M.S. | 2017 | Polymer-templated Crystallization of Perovskite Film and Conductive Ionomer Doped Perovskite Film for High Performance of Perovskite Solar Cells |
| Fu | Xuewei | M.S. | 2015 | Graphene/V2O5 Hybrid Aerogels as Electrode Materials for Electrochemical Capacitors |
| Fu | Yao-Tsung | Ph.D. | 2011 | Molecular Simulation of Dispersion and Mechanical Stability of Organically Modified Layered Silicates in Polymer Matrices |
| Fujiyama-Novak | Jane | Ph.D. | 2009 | The Rolel of Nanoclay on the Deformation Behavior of Polypropylene/Maleic Anhydride Modified Polypropylene Films and Fibers in Full and Partially Molten State Processing |
| Gagov | Atanas | Ph.D. | 2007 | Instabilities in Elongation Flows of Polymers at High Deborah Numbers |
| Gaikwad | Sanjeev | M.S. | 1994 | A Study of Dynamic Vulcanization of Polycarbonate and Fluoroelastomer Blends |
| Galle | Fred | M.S. | 1997 | Experimental Study of Flow Mechanisms and Mixing in a Kobe Steel Nex-t Continuous Mixer |
| Gao | Tongzhai | Ph.D. | 2014 | Anticorrosive Organic/Inorganic Hybrid Coatings |
| Gao | Xiang | Ph.D. | 2017 | Ultrasound Assisted Extrusion and Properties of Polycarbonate/Carbon Nanotubes Composites and Cast Films |
| Garcia Buduen | Romny | M.S. | 2013 | Evaluation of the Role of Hydrodynamic Shear on Breakage of Thermally Conductive Particles during Compound Preparation |
| Garcia-Ramirez | Rafael | M.S. | 1991 | The Effect of a Mobile Boundary on the Extrusion of Polymers |
| Garza-Lopez | Tito | M.S. | 2000 | Ablation and Adhesion Behavior Evaluation of Polypropylene Backed Pressure Sensitive Adhesive Tapes Using the Excimer Laser |
| Gautam | Keshav | M.S. | 1999 | Optoelectronic Studies on Novel Conjugate Polymer Systems |
| Geng | Yan | M.S. | 2013 | Emulsion Polymerized Monodisperse Silica-Polymer Core-Shell Nanoparticles for Antireflective Coatings |
| Gerrard | David | Ph.D. | 2000 | Dynamic and Kinematic Effects in the Friction and Wear of Rubber |
| Getzie | Travis | Ph.D. | 2012 | Magneto-Optical and Rheological Behaviors of Oil-Based Ferrofluids and Magnetorheological Fluids |
| Ghanem | Mahmoud | M.S. | 2004 | The Effect of Processing Conditions on the Structural Gradients Developed in Injection Molded Bacterial Poly (3Hydroxy Butyrate-Co-3Hydroxy Valerate) Parts |
| Ghose Belcher | Sayata | Ph.D. | 2004 | Recycling of Polyurethane Rubber and Foam by the Application of High Power Ultrasound |
| Ghosh | Monoj | Ph.D. | 2016 | Fabrication of Inorganic Oxide Nanofibers using Gas Jet Fiber Spinning Process and their Applications in Photocatalytic Oxidation |
| Ghosh | Sudip | M.S. | 1994 | Crystallization Behavior and Processing-Structure-Property Relationship in Binary Blends of PPS |
| Gintert | Michael | Ph.D. | 2007 | A Novel Approach to Obtain High Performance Layered Silicate Thermoset Polyimide Matrix Nanocomposites |
| Glogovsky | Todd | M.S. | 1991 | A Model of Stress Softening for a Carbon Filled Rubber |
| Gmerek | Michael | M.S. | 1993 | Shear-Induced Crystallization in Injection Molding of Thermoplastics: Modeling and Experiment |
| Gomatam | Rajesh | Ph.D. | 2002 | Modeling Fatigue Behavior of Electronically Conductive Silver Filled Adhesive |
| Gong | Ziyuan | M.S. | 2019 | Effect of Sodium Dodecyl Sulfate on the Structure and Rheological Properties of Pluronic F108 - Poly(acrylic acid) Coacervates |
| Gotad | Pratik | Ph.D. | 2024 | Design of Porous Gel and Aerogel Media for Oil-Water Separation and Small Organic Molecule Adsorption |
| Gowrishankar | Sunil | M.S. | 1999 | Stiffness and Vibrational Behavior and Design of Composite Cylindrical Helical Springs Manufactured using Filament Winding |
| Graves | David | M.S. | 1998 | On-Line Measurements of Crystallization of Low Density Polyethylenes Using Integrated Fiber Optic Laser Raman Spectroscopy, Light Depolarization and Small Angle Laser Light Scattering Techniques |
| Grolman | Danielle | Ph.D. | 2017 | Self-Organization and Controlled Spatial Distribution of Cellulosic Nanofillers in Polymer Thin Films |
| Gu | Chang-Il | Ph.D. | 2000 | Reactive Blending of Treated Waste Rubber With Polyamides and Their Monomer |
| Gu | Senlong | M.S. | 2013 | Effect of Polybenzoxazine on Properties of Shape-memory Polyurethanes with Glassy and Crystalline Soft Segments |
| Gu | Senlong | Ph.D. | 2016 | Building Blocks and Their Effects on Polymer Aerogel Properties |
| Gu | Zipeng | M.S. | 2018 | Emulsion Templated Polyimide Aerogel Foam and Hybrid Aerogel Foam as Absorbents for Oil Cleanup |
| Guenthner | Andrew | Ph.D. | 2000 | Evaporation-Induced Solidification and Morphology Development in Polymer Fibers and Films |
| Guha | Abhishek | M.S. | 2003 | Synthesis and Characterization of Polypropylene Microfibers Containing Carbon Nanofibers and Single Walled Carbon Nanotubes |
| Guhathakurta | Soma | Ph.D. | 2009 | Anhydrous State Proton and Lithiium Ion Conducting Solid Polymer Electrolytes Based on Sulfonated Bisphenol-a-poly(Arylene Ethers) |
| Gunes | Ibrahim Sedat | Ph.D. | 2009 | Analysis of Shape Memory Properties of Polyurethane Nanocomposites |
| Gunes | Kaan | Ph.D. | 2009 | In-Situ Ultrasonic Compatibilization of Binary Blends of Flexible Chain Polyesters and Wholly Aromatic Liquid Crystalline Polymers |
| Guo | Hao | M.S. | 2018 | Role of Chemical Surface Preference in Translational and Reorientational Nanoconfinement |
| Guo | Jiao | Ph.D. | 2010 | Development of Ion Conductive Polymer Gel Electrolytes and Their Electrochemical and Electromechanical Behavior Studies |
| Guo | Xiaoping | Ph.D. | 1999 | Crystallization, Microstructure, Residual Stresses and Birefringence in Injection Molding of Semicrystalline Polymer: Simulation and Experiment |
| Guo | Yingmin | M.S. | 2016 | Continuous Ultrasonic Process for Devulcanization of Rubbers Suitable for Incorporation in New Tires |
| Guo | Yuanhao | M.S. | 2013 | Reinforcement of Hydrogels by Nanofiber Network |
| Guo | Yuanhao | Ph.D. | 2016 | Functional Polymer Film Roll-to-Roll Manufacturing by Field Assisted Alignment of Nanoparticles/Phases in Thickness "Z" Direction |
| Guo | Yuelei | M.S. | 2018 | Investigation of Silicone Rubber Blends and Their Shape Memory Properties |
| Guo | Yuewei | M.S. | 2021 | Variation in the Properties of Ionomers Synthesized by Ionic Functionalization Pre- and Post-Polymerization |
| Gupta | Sahil | Ph.D. | 2014 | Structure-Property Relationships in Polymers for Dielectric Capacitors |
| Guzman | Gustavo | Ph.D. | 2016 | Bimodal Amphiphilic Polymer Con etworks: Structure-Property Characterization, Processing and Applications |
| Ha | Seung-Kyu | M.S. | 1997 | Continuous Polymerization and Copolymerization of Lauryl Lactam in a Modular Intermeshing Corotating Twin Screw Extruder |
| Halthore | Ramprasad | M.S. | 1999 | Study on the Effect of Pigments on Mechanical Properties of Injection Molded Polypropylene |
| Han | Min | M.S. | 1990 | Wall Slip of Rubber and Rubber Compounds: Influence of Materials of Construction and Additives |
| Han | Peter | M.S. | 1991 | A Fundamental Study of the Rheology and Mold Filling of Sheet Molding Compounds |
| Han | Peter | Ph.D. | 1995 | A Basic Study of the Rheological Properties of Structurally-Complex Polymer Systems Including Thermoplastic Elastomers |
| Hasheminasab | Sayyed Abed | M.S. | 2020 | Bismaleimide Methacrylated Polyimides-Polyester Hybrid UV-Curable Powder Coating |
| Hassan | Mohamed | Ph.D. | 2004 | Novel True Stress-True Strain-Birefringence Measurement Systems for Real Time Measurement During Biaxial Stretching and Heat Setting Polymer Films "Application on PET Films |
| Havet | Guy | Ph.D. | 2000 | Experimental Investigation and Modeling of the Rheology of Silica-Polystyrene Mixtures |
| Hayirlioglu | Arzu | Ph.D. | 2014 | Directed Assembly of Block Copolymer Films via Surface Energy Tunable Elastomers |
| He | Chunxia | M.S. | 1999 | Studies of Flows of Polyisobutylene in Long Circular and Square Dies |
| He | Fang | M.S. | 1997 | Fatigue and Stress Relaxation Behavior of High-Density Polyethylene |
| He | Lijuan | M.S. | 1997 | Viscoelastic Behavior of Narrow Molecular Weight Distributed Polybutadienes |
| He | Ruixuan | Ph.D. | 2016 | Studies on Ionic Conductivity and Electrochemical Stability of Plasticized Photopolymerized Polymer Electrolyte Membranes for Solid State Lithium Ion Batteries |
| He | Zhouying | Ph.D. | 2015 | Organic/Inorganic Hybrid Coatings for Anticorrosion |
| Hill Marko | Meagan | M.S. | 2005 | Adding Value to Recycled Polyethylene Through the Addition of Multi-Scale Reinforcements |
| Hindi | Majid | Ph.D. | 1989 | Mechanochemical Fatigue and Heat Build-Up in Elastomers |
| Hindi | Rick | M.S. | 2001 | Thermomechanical Analysis of a 2 Ply Composite Laminate Test: Investigation of Damage Evolution from Socketing to Bridging |
| Hinojosa-Falcon | Luis | M.S. | 2003 | Plasticization and Stabilization Effects on the Mechanical and Thermal Properties of Plasticized PVC Nanocomposites |
| Hong | Chang Kook | Ph.D. | 2001 | The Application of Powerful Ultrasound to Devulcanization of Rubbers and Compatibilization of Polymer Blends |
| Hong | Chang Min | Ph.D. | 2005 | Investigation of Shear-Induced Migration of Filler Particles in Molding Flows |
| Hong | Myeong-Ho | Ph.D. | 2004 | Structure Development of Cyclopolyolefins and Polystyrenes in Melt Spinning and Film Stretching Process |
| Hong | Myung-Hyuk | Ph.D. | 1997 | Theoretical and Experimental Studies in Modular Intermeshing Counter-Rotating Twin Screw Extruders |
| Howard | Faith | M.S. | 2001 | Reactive Dispersion of Waste Ground Rubber With Polyolefin |
| Hoy | Thomas | M.S. | 2016 | Optimizing Solvents for a Quinary System |
| Hsiung | Chang-Meng | Ph.D. | 1990 | Processing-Structure-Property Relationship and Simulation of Structure Gradients in Injection Molding of Semi-Crystalline Aromatic Polycondensates |
| Hu | Benfei | M.S. | 1992 | Theoretical and Experimental Study of Internal Mixers |
| Hu | Peng | M.S. | 1996 | Racheting of Polyethylene Pipe |
| Hu | Yongan | Ph.D. | 2023 | Study of Urethane Methacrylates in Acrylic Latexes: The Effect of Bulky Alkyl Terminal Groups and Self-Healing Behavior |
| Hu | Yongan | M.S. | 2019 | Influences of Monomer Hydrophobicity on Secondary Nucleation in Emulsion Polymerization |
| Hu | Yupeng | M.S. | 2015 | Electrospun Nanofibers for Programmable Drug Delivery System Sequentially Targeting Inflammation and Infection |
| Huang | Chongwen | Ph.D. | 2016 | Rheology of Oligomeric Sulfonated Polystryene Ionomers |
| Huang | Keyuan | Ph.D. | 2015 | Decrosslinking of Crosslinked Polyethylene via Ultrasonically Aided Extrusion |
| Huang | Rundong | M.S. | 2020 | Tribological Behavior of Ionic Liquid Nanoconfined between Hydrophilic and Hydrophobic Surfaces |
| Huang | Shifeng | M.S. | 2019 | Investigation of Interfacial Dynamics Between Active Surfaces Ranging from Soft Biomacromolecules to Hard Inorganic Surfaces |
| Huang | Shuyue | M.S. | 2018 | Coacervation and Phase Behavior of Aqueous Solutions of Oppositely Charged Polyelectrolytes |
| Huang | Tsang-Min | Ph.D. | 2010 | Phase Equilibria of Mesophase Transitions in Binary Liquid Crystal Mixtures Involving Induced Ordered Phases |
| Huang | Wenyi | Ph.D. | 2006 | Synthesis, Characterization and Rheology of Functional and Heterocyclic Liquid-Crystalline Polymers |
| Huang | Yeong-Hua | Ph.D. | 1991 | One- and Two-Dimensional Channel Flow of a Viscoelastic Plastic Material: Simulation and Experimentation |
| Huang | Yiyun | M.S. | 1995 | Self-Reinforced Prepregs, Laminates and Injection Moldings of HDPE/LCP Blends |
| Huang | Zixu | M.S. | 2018 | Flexible Perovskite Hybrid Solar Cells Through Organic Salt Treated Conducting Polymer as the Transparent Electrode |
| Huarng | Jyh-Chiarng | M.S. | 1987 | Miscibility and Morphology Studies for Ternary Blends |
| Hung | Jui-Hsiang | Ph.D. | 2018 | Efficient Computational Strategies Enabling Insights into the Glass Transition |
| Huq | Abul | Ph.D. | 2015 | Interfacial and Solvent Processing Control of Phenyl-C61-Butyric Acid Methyl Ester (PCBM) Incorporated Polymer Thin Films |
| Hutjens | Charles | M.S. | 2013 | Morphology Control for Model Block Copolymer/Nanoparticle Thin Film Nano-Electronic Devices on Conductive Substrates |
| Ihm | Dong Joon | Ph.D. | 1994 | Compatibilization, Morphology and Mechanical Properties of Polyethylene Terephthalate/Polyethylene Blends |
| Isayeva | Irada | M.S. | 1997 | Studies of Miscibility, Crystallization and Structure-Property Relation of Blends of Two Semicrystalline Polymers: Poly(vinylidene fluoride) and Poly(1.4-butylene adipate) |
| Iskander | Suzette | M.S. | 1994 | Blends of Copolyester Thermoplastic Elastomer with Nitrile Rubber |
| Jadhav | Sainath | Ph.D. | 2022 | Development of an Epoxy Mixed-Matrix Composite System Using an Ionic Liquid-Based Coordination Polymer |
| Jaeger | Tamara | Ph.D. | 2020 | Insights into Physical Aging of Thermally-quenched and Solvent-cast Polymers from Molecular Dynamics Simulation |
| Jain | Sachin | M.S. | 2000 | Nanocomposites of High Performance Thermoplastic Polymers Using Epoxy as Processing Aid |
| Jarukumjorn | Kasama | Ph.D. | 1999 | On-Line Monitoring of Grafting Monomers onto Low Density Polyethylene in a Model Twin Screw Extruder by Fiber Optic Raman Spectroscopy |
| Javadi | Ali | Ph.D. | 2017 | Methacrylated Poly(ethylene Glycol)s as Precursors for Superplasticizers and UV-Curable Electrical Contact Stabilization Materials |
| Jenkins | John | M.S. | 2007 | Ultrasonic Decrosslinking of Crosslinked Polyethylene |
| Jeong | Jae-Hyeuk | Ph.D. | 2003 | A Study of Complex Channel Flows of Polymer Melts |
| Jeong | Jisoo | Ph.D. | 2023 | Sulfur Cathodes and Silicon Anodes for High-Energy Density and High-Power Density Applications: The Way to the Next Generation Batteries |
| Jeung | Soondeuk | Ph.D. | 2005 | The Studies of Polyurethane and Polyethylene Oxide Electrolites with Various Salts |
| Jha | Kshitij | Ph.D. | 2012 | Polarization and Self-Assembly at Metal-Organic Interfaces: Models and Molecular-Level Processes |
| Ji | Shuxin | M.S. | 2017 | Electrostatically Active Aerogels for Air Filtration and Synthesis of Syndiotatic Polystyrene Aerogel Microparticles |
| Ji | Xiang | M.S. | 2016 | The Influence of Assembly pH and Clay Inclusion on the Actuation of Polyelectrolyte Multilayers |
| Jian | Pei-Zhen | Ph.D. | 2019 | Fabrication of Solvent and Temperature Sensitive Polymer Bilayer Bending Actuators |
| Jiang | Fanhui | M.S. | 2014 | Real-Time Optical and Mechano-Optical Studies during Drying and Uniaxial Stretching of Polyetherimide Films from Solution |
| Jiang | Haowei | M.S. | 2018 | Time-Salt Superposition in Polyelectrolyte Complexes and Enhanced Mechanical Properties of Three-Dimensional Printing by Core-Shell Structured Thermoplastics |
| Jiang | Qibo | Ph.D. | 2008 | Modeling Flow, Melting, Solids Conveying and Global Behavior in Modular Intermeshing Counter-Rotating Twin Screw Extruders |
| Jimenez | Guillermo | Ph.D. | 2007 | Characterization of PMMA and TPU Carbon Nanofiber Composites Produced by Chaotic Mixing |
| Jin | Chenxi | M.S. | 2020 | Fabrication of Non-Spherical Polyimide Aerogel Microparticles |
| Jin | Weize | M.S. | 2015 | Relative Alignment of CZA (Cold Zone Anneal) Polymerm in Nano Imprinted Films |
| Joo | Minjung | Ph.D. | 2016 | Silane Terminated Macromonomers with Nanoparticles and Surface Segregation of Fluorinated Moieties |
| Joshi | Prashant | Ph.D. | 1999 | Viscoelastic Modeling of Filled, Crosslinked Rubbers |
| Jung | Chang Do | Ph.D. | 2005 | Synthesis of Thermoplastic Polyurethanes and Polyurethane Nanocomposites Under Chaotic Mixing Conditions |
| Jung | Ho-Chul | Ph.D. | 2004 | Investigation of Melting in Modular Intermeshing Co-Rotating Twin Extruder |
| Kadota | Masanori | M.S. | 1997 | The Evolution of Structural Hierarchy in Co-Injection Molded Polystyrene Polypropylene Polymer Pairs |
| Kaewpanya Magaraphan | Rathanawan | M.S. | 1993 | Adhesion of High Density Polyethylene and Polypropylene |
| Kalan | Steven | M.S. | 2011 | Surface Modification of Silicon Through Thermal Annealing and Rinsing of Solvent Cast Polystyrene Films |
| Kalkan | Zehra | Ph.D. | 2006 | Generation of Advanced Polyamide-6,6 Nanocomposites via Interfacial Polycondensation |
| Kalvani | Bimal | M.S. | 1991 | An Investigaton of EMI Shielding Composites Made By Incorporating Low-Melting Point Metals into Thermoplastics |
| Kamruzzaman | Mohammad | M.S. | 2003 | An Investigation of Harmonic Properties of Carbon Nanotubes and Their Hexagonal Arrays |
| Kang | Ho-Jong | Ph.D. | 1989 | Structure Development and Dynamics in Double Bubble Tubular Film Processing |
| Kanuga | Karnav | Ph.D. | 2006 | A Fundamental Study on the Non-Linear Mechano-Optical Behavior of Polyethylene Naphthalate, Its Blends with Polyetherimide and its Nanocomposites |
| Karmarkar | Uday | M.S. | 2000 | Mechanical Adhesion Analysis of Multi-Stepped Double Scarf Joints with Void and Disbond Effects |
| Kasbe | Pratik | Ph.D. | 2024 | Two-Dimensional (2D) Hybrid Nanomaterials as Functional Nanocoating and Solid Lubricants |
| Ke | Linping | Ph.D. | 2010 | Dispersion Characteristics of Nanocomposites Based on Functionalized Block Copolymers |
| Keawwattana | Wirunya | Ph.D. | 2002 | Phase Behavior, Crystallization and Morphological Development in Blends of Polypropylene (PP) Isomers and Poly (Ethylene-Octene) Copolymer |
| Keuchel | Kenneth | M.S. | 1994 | Instrumented Spin Welding of Polypropylene |
| Keum | Jongmin | Ph.D. | 2004 | Engineering Analysis of Devolatilization and Reactive Processing |
| Khanolkar | Amit | M.S. | 2000 | Effect of Interfacial Weight Loss by Silver Migration on the Pull-Out Strength of Silver Wire Embedded in an Adhesive Matrix |
| Kiehl | Christopher | M.S. | 1992 | Nondestructive In-Line Monitoring of the Polymerization of Methyl Methacrylate with Ultrasound |
| Kim | Byong-Jun | Ph.D. | 2002 | Reactive Extrusion of E-Caprolactone Polymers and Application of Poly(Lauryl-B-Caprolactone) as a Compatibilizing Agent in Blends Containing Poly(Vinyl Chloride) |
| Kim | Byoungjoo | Ph.D. | 1996 | Studies of Thermal/Peroxide Induced Degradation and Maleation of Polypropylene in a Modular Intermeshing Twin Screw Extruder |
| Kim | Do | Ph.D. | 2003 | Phase Equilibria and Dynamics of Thermally Induced and Polymerization-Induced Phase Separations in Main-Chain Liquid Crystalline Polymer Mixtures |
| Kim | Dong-Ok | Ph.D. | 2000 | Effect of Pendent Side Groups on the Rheology, Mesophase Structure, Molecular Packing, and Conformational Properties of Thermotropic Liquid-Crystalline Polymers |
| Kim | Eung Gun | M.S. | 1991 | Plastic Effects in Peeling Polyethylene Films |
| Kim | Eung Kyu | Ph.D. | 2000 | Investigation of Transient Flow and Element Analysis in Modular Intermeshing Co-Rotating Twin Screw Extruders |
| Kim | Hyunjung | M.S. | 1997 | Mechanical Behavior and Adhesion of Block Copolymer/Polystyrene Pairs |
| Kim | In | Ph.D. | 2004 | Development of New Generation of Copolymers via Reactive Extrusion in a Twin Screw Extruder and Application in Various PVC Blends |
| Kim | Jeong-Cheol | Ph.D. | 1995 | The Influence of Processing History on Structural Characteristics of Poly(ethylene 2,6 naphthalene dicarboxylate) and Poly(ether imide) Blends |
| Kim | Jin Kuk | Ph.D. | 1990 | Analysis of Flow and Mixing in an Internal Mixer with Different Rotor Designs |
| Kim | Jongdae | Ph.D. | 2004 | A Study of Structure Formation on PET, PBT, and PS Surfaces by Excimer Laser Ablation |
| Kim | Kwang-Jea | Ph.D. | 1998 | Rheology, Processing, and Characterization of Isotropic, Anisotropic, and Mixed Particle Filled Polymer System |
| Kim | Kyuk Hyun | Ph.D. | 2004 | Flow Induced Crystallization and Birefringence Development of Semicrystalline Polymers in Injection Molding and Fiber Spinning Process |
| Kim | Myung Hwan | Ph.D. | 1990 | Theoretical and Experimental Studies of Flow Behavior in Modular Non-Intermeshing Counter-Rotating Twin Screw Extruders |
| Kim | Nam Hyung | Ph.D. | 2009 | Injection-Compression and Co-Injection Moldings of Amorphous Polymers: Viscoelastic Simulation and Experiment |
| Kim | Namil | Ph.D. | 2010 | Photoisomerization- and Photopolymerization-induced Phase Trnasitions in Mixtures of Photoresponsive Chromophores and Reactive Mesogens |
| Kim | Pan Jong | Ph.D. | 1993 | Flow Visualization and Study of Chemical Reactions in a Modular Intermeshing Co-Rotating Twin Screw Extruder |
| Kim | Pan Soo | Ph.D. | 1996 | Flow and Mixing Characteristics in an Intermeshing Counter-Rotating Rotor Internal Mixer |
| Kim | Seok-Ho | Ph.D. | 1998 | Continuous Ultrasonic Devulcanization of Sulfur Cured SBR Vulcanizates |
| Kim | Sung Jun | Ph.D. | 2016 | Monolithic Aerogels and Their Applications in Airborne Nanoparticle Filtration |
| Kim | Won-Ho | Ph.D. | 1992 | Local Deformation of Rubber Seals |
| Kim | Won-Kook | M.S. | 1993 | Phase Behavior and Dynamics of Phase Separation in a Mixture of Polystyrene and Liquid Crystal |
| Kim | Younghoon | Ph.D. | 2004 | A Study of Polymer/Clay Nanocomposite Formation by Melt-Intercalation Process |
| Ko | Che-Chian | Ph.D. | 1994 | Phase Separation and Chemical Reactions in Blends of Polycarbonate with Polymethyl Methacrylate Isomers |
| Ko | Dong-Hwi | M.S. | 1991 | Enhancement of Electrical Properities of Uniaxially and Biaxially Processed Poly-p-phenylene Sulfide Film |
| Kochar | Lalit Singh | M.S. | 1986 | High Pressure Vulcanization of Elastomers |
| Konishi | Yuma | M.S. | 2004 | Nanoparticle Induced Carbon Black Network Self-Assembly and Structural Hierarchy Development in Injection-Molded Conductive Composites |
| Koombhongse | Piyawit | Ph.D. | 2001 | Phase Behavior and Morphology of SAN/PMMA Under High Flow Rates |
| Kothari Suri | Shipra | M.S. | 2000 | Vulcanization Induced Phase Separation in Blends of Syndiotactic Polypropylene and Metallocene Catalysed Ethylene Propylene Diene Terpolymer |
| Kumar | Rishi | Ph.D. | 2010 | Manufacturing of Polymer Nanocomposites Containing Carbon Nanotubes and Carbon Nanofibers Using Ultrasound Assisted Extrusion Process |
| Kumar | Sumeet | M.S. | 1998 | Selective Use of Rubber Toughening to Optimize Lap Joint Strength |
| Kuttappa | Sanjay | M.S. | 1994 | Static and Dynamic Characteristics of Rubber Compounds |
| Kuznicki | Jason | M.S. | 2005 | Water Uptake and Fracture Behavior of Epoxy/Clay Nanocomposites Used for Bonding Granite |
| Kwa | Teik Lim | M.S. | 2006 | Development of On-Line True Stress-Strain-Electrical Conductivity Uniaxial Tensile Stretching Measurement System & its Utility in Thermo-Mechano-Electrical Behavior of Carbon Black (CB) Filled PolyLactic Acid (PLA), Binary & its Nanoclay (NC) Ternary Nano |
| Kwak | Seung-Yeop | M.S. | 1989 | PVC-Plasticizer Interaction in Plastisol Processing: Effect of the Homologous Series of Plasticizers on Gelation and Fusion Behavior |
| Kwak | Seung-Yeop | Ph.D. | 1992 | Investigation of Morphology on Progress of Mixing PVC With Different Polymers: Structure and Mechanical Behavior After Mixing |
| Kwon | Keehae | Ph.D. | 2005 | Anisotropic Shrinkage in Injection Moldings of Semicrystalline and Amorphous Polymers: Simulation and Experiment |
| Kwon | Youngdon | Ph.D. | 1994 | Studies of Viscoelastic Constitutive Equations and Some Flow Effects for Concentrated Polymeric Fluids |
| Kye | Daniel | Ph.D. | 2022 | Towards Designing of Polymeric Latent Humidity Sensor |
| Kye | Hyoungsan | Ph.D. | 1995 | Continuous Polymerization of Caprolactam and Reactive Blending in a Modular Intermeshing Corotating Twin Screw Extruder Integrated with Polyamide Fiber Melt Spinning |
| Lai | Sun-Mou | Ph.D. | 1993 | Effect of Interfacial Bonding on the Strength of Adhesion |
| Lai | Tzu-Yu | Ph.D. | 2020 | Phase Behavior Study and Thermoresponsive Bilayer Fabrication of Organogels |
| Lalgudi | Basker | M.S. | 2000 | An Experimental Investigation of Rheology and Chemorheology of Styrene Butadiene Rubber (SBR) and Natural Rubber (NR) |
| Lang | Ryan | M.S. | 2013 | Nanoconfinement Effects on the Glass Transition: A Study of Nanolayered and Freestanding Coarse-Grain Polymer Films |
| Laokijcharoen | Pasaree | Ph.D. | 2000 | The Phase Morphology of Blends of Natural Rubber with Crystalline Hydrocarbon Plastics |
| Lapshin | Sergey | Ph.D. | 2006 | Experimental and Theoretical Study of Polyolefin-Clay Nanocomposites Prepared Using High Power Ultrasound |
| Larentzos Rubino | Evangelia | M.S. | 2000 | The Effect of Ground Silica Fillers on the Processing Properties of Silicone Compounds |
| Lazarenko | Daria | Ph.D. | 2022 | Understanding Bulk and Interfacial Behavior of Ionic Liquids-Containing Fluids Using Predictive Computational Tools |
| Lee | Byoung Jo | Ph.D. | 2009 | Nucleating Agent-Assisted Preparation of Polypropylene (PP)/Polyhedral Oligomeric Silsesquioxane (POSS) Nanocomposites and Their Characterization |
| Lee | Byung-Hwa | Ph.D. | 2001 | Experimental and Theoretical Studies of Reactive Extrusion Process in Twin Screw Extruders: Formation of Polycaprolactam and Block Copolymers |
| Lee | Dong Jae | Ph.D. | 1998 | Experimental and Theoretical Study of Sandwich Injection Molding Process |
| Lee | Eon-Seok | Ph.D. | 1997 | Influence of Fluoropolymers on the Extrusion Characteristics of Thermoplasltic Melts |
| Lee | Hak-Soo | Ph.D. | 1991 | Thermodynamics and Kinetics of Phase Separation in Functional Prepolymer Mixtures and Networks |
| Lee | Hyunsang | Ph.D. | 2024 | Development of Polyoxide-Co-Polysulfide Electrolyte for High Specific Capacity Lithium Metal Batteries and Supercapacitors |
| Lee | Jaehyung | Ph.D. | 1999 | Dynamics of Polymerization Induced Phase Separation in Reactive Polymer Blends |
| Lee | Je-Kyun | Ph.D. | 1998 | Morphology Evolution in Polymer Blend During Compounding and Subsequent Processing |
| Lee | Jehoon | Ph.D. | 2017 | Synthesis, Characterization, and Applications of the Low Cross-Link Density Poly Acrylate Elastomers using Direct Reversible Addition Fragmentation Chain Transfer Cross-Linker |
| Lee | Jeong | Ph.D. | 1991 | Fundamental Properties and Structure Development in Solid State Processed Vinylidene Fluoride/Trifluorethylene Copolymers |
| Lee | Jeongwoo | Ph.D. | 2015 | Porous Carbon/TIO2 Composites as an Anode of Sodium Ion Batteries |
| Lee | Keun Yong | Ph.D. | 2005 | Structure and Properties of Polymer Blend Nanocomposites |
| Lee | Kyung Min | Ph.D. | 2002 | Phase Transition, Rheology, and Morphology of Block Copolymers and Side-Chain Liquid-Crystalline Polymers |
| Lee | Nam Seok | M.S. | 1990 | Miscibility of Blends of CIS-1,4 Polyisoprene-Butadiene-Styrene Copolymers and Polybutadiene |
| Lee | Seung Wook | M.S. | 1992 | Fundamental Studies on Crystallization Kinetics and Necking Behavior of Polyethylene 2,6-Naphthalate |
| Lee | Shi-Ho | Ph.D. | 1996 | Influence of Viscosity Ration on Mixing and Melting of Immiscible Polymer Blends in a Modular Intermeshing Corotating Twin Screw Extruder |
| Lee | Sung-Duk | M.S. | 1989 | Critical Comparison of Methods of Measurement of Carbon Black Dispersion in Rubber Compounds |
| Lewis | Elizabeth | Ph.D. | 2020 | Aging of Thin Glassy Polymers Probed by Ellipsometry and Mechanics |
| Lewis | Ivor | M.S. | 1992 | Rheological and Process/Mechanical Properties of Estaloc Polyurethane |
| Lewis | Todd | Ph.D. | 2014 | Carbon Nanotube Composites Prepared by Ultrasonically Assisted Twin Screw Extrusion |
| Li | Bohao | M.S. | 2013 | Room Temperature Processed Molybdenum Oxide Thin Film as a Hole Extraction Layer for Polymer Photovoltaic Cells |
| Li | Chao | M.S. | 2016 | Tunable West Adhesion in Polyelectrolyte Multilayers |
| Li | Cheng | M.S. | 2018 | Synthesis of Ionically Crosslinked Polyelectrolytes by Homopolymerization of an Ion-Pair Comonomer |
| Li | Chengtao | Ph.D. | 2003 | Two Component Co-Injection and Transfer Molding and Gas-Assisted Injection Molding of Polymers: Simulation and Experiment |
| Li | Guo | M.S. | 1995 | Kinetics of Quiescent and Shear-Induced Crystallization: Molecular Weight Effects |
| Li | Hang | M.S. | 1999 | Structure Development in Melt Spinning Filaments and Biaxially Stretched Films from Poly(Butylene Terephthalate) Based TPE's |
| Li | Jiaxi | M.S. | 2014 | Modified Soybean Oil-Extended SBR Compounds and Vulcanizates |
| Li | Jiaxi | Ph.D. | 2017 | Toward Replacement of Petroleum Plasticizer by Modified Soybean Oil in Rubbers |
| Li | Jingyu | M.S. | 2015 | A Novel µ-Fluidic Channel Assisted Encapsulation Technique for Layer-by-Layer Polymer Nano- and Microcarrier Fabrication |
| Li | Jiaxi | M.S. | 2014 | Modified Soybean Oil-Extended SBR Compounds and Vulcanizates |
| Li | Li Li | M.S. | 1995 | Effects of Particulate Filler Type, Size and Surface Treatment on Rheological Behavior of Filled Rubber Compounds |
| Li | Mingzhe | M.S. | 2014 | Mechanical Properties and Swelling Behavior of BPEI-Metal Ion/PAA Polyelectrolyte Multilayer Films |
| Li | Ran | M.S. | 2020 | Research on Highly Conductive Solid-State Electrolyte Membrane and New Electrode Binder (FLEP 60) in Polymer Electrolyte Lithium Ion Half Cells |
| Li | Sinan | Ph.D. | 2007 | Design and Construction of Nanoarchitectural Metal Derivatives-Carbon Nanotype Hybrids |
| Li | Tong | M.S. | 2015 | Terrace Phenomenon of Block Copolymers (BCPs) via Cold Zone Annealing (CZA) |
| Li | Wenhao | M.S. | 2019 | Preparation of Janus Nanoparticles and its Application in Oil Industry |
| Li | Wenqi | M.S. | 2014 | Orderly Perforation of Polyester Films by Excimer Laser |
| Li | Xindi | M.S. | 2018 | Modification of Sulfonated Syndiotactic Polystyrene Aerogels Through Ionic Interactions |
| Li | Yifan | M.S. | 2016 | High Performance Perovskite Hybrid Solar Cell via Interfacial Engineering |
| Li | Zhehui | M.S. | 2013 | Barium Oxide as an Intermediate Layer for Polymer Tandem Solar Cell |
| Li | Ziyan | Ph.D. | 2024 | Fabrication of SEBS/Wax Bilayer Actuators Through Fused Filament Fabrication (FFF) 3D Printing |
| Li | Ziyan | M.S. | 2020 | High Temperature Resistant Polyimide for UV Curable Powder Coatings |
| Liang | Songxin | M.S. | 1998 | Phase Behavior in Mixtures of Smectic-LC/polymer, Nematic-LC/polymer and Smetic-LC/side-on side-chain Liquid Crystalline Polymer |
| Liang | Tian | M.S. | 2013 | Continuous Devulcanization of Ground Tire Rubber of Different Particle Sizes Using an Ultrasonic Twin-Screw Extruder |
| Liang | Tian | Ph.D. | 2017 | Structure and Properties of Rubbers and their Blends Manufactured with Ultrasonically Assisted Extrusion |
| Liang | Yi Cheng | Ph.D. | 2000 | Experimental and Theoretical Study of Self-Reinforced Polypropylene/LCP Blends |
| Lim | Dong-Soo | Ph.D. | 1991 | Miscibility and Dynamic Behavior of Phase Decomposition in Binary Mixtures of Polycarbonate and Poly(methyl Methacrylate) Stereoisomers |
| Lim | Soon-Ho | Ph.D. | 1991 | Particle Orientation Development and Directional Growth Phenomena in Processed Filled Thermoplastic Compounds |
| Lin | Che-Kuan | Ph.D. | 2022 | Inhibition of Free Radical Cured Thermosetting Acrylic Coatings |
| Lin | Heng | M.S. | 2003 | The Effects of High Intensity Ultrasonic Waves on Polypropylene, Polyamide 6 and Their Blends |
| Lin | Kehua | M.S. | 2016 | Ellipsomery Measurements of Chemical Reactions and Diffusion Processes in Polymer Films |
| Lin | Tsui-Hsun | Ph.D. | 2009 | Birefringence, Anisotropic Shrinkage and Luminance in Injection Molded Light-Guide Plate: Modeling and Experiment |
| Lin | Tzu-Jen | Ph.D. | 2013 | Force Field Parameters, Molecular Models, and Adsorptions of Biomolecules on Hydroxyapatite at Aqueous Interfaces |
| Lin | Wan-Hua | M.S. | 2017 | Cellulose Aerogel Monoliths and Microparticles and their Applications in Drug Delivery System |
| Ling | Zichen | M.S. | 2019 | Ion Effects on Self-Healing Poly(acrylic acid) and Poly(methacrylic) Acid Gels |
| Lingel | Clinten | Ph.D. | 2024 | The Effects of Pressurized Methane on the Surface Energy of Lubricating Oil and PTFE and PEEK Sealing Materials |
| Lipowski | Brian | M.S. | 2014 | Phase Behavior of 12-Hydroxystearic Acid Gels |
| Liu | Chang | M.S. | 2015 | Polyaniline/Graphene Based Symmetric and Asymmetric Solid-State Supercapacitors |
| Liu | Chang | M.S. | 2014 | Effect of Polymer Molecular Weight, Binary Processing Additives, Two-Dimensional Polymer on Efficiency of Polymer Solar Cells |
| Liu | Chang | Ph.D. | 2017 | High Performance Solution-processed Perovskite Hybrid Photovoltaics: Solar Cells and Photodetectors |
| Liu | Chengjun | M.S. | 2000 | Chemical and Viscoelastic Effects on Electrical Conduction by Emeraldine Salt in Powder and Composite Adhesive Forms |
| Liu | Dan | M.S. | 2000 | Mixing Silica and Other Fillers into Elastomers in NEX-T Continuous Mixer |
| Liu | Hua | Ph.D. | 2013 | Transport Mechanisms and Surface Properties Study on Polymer-based Solar Cells |
| Liu | Jieruo | M.S. | 2013 | Manufacturing of Polypropylene (PP)/ Ground Tire Rubber (GTR) Thermoplastic Elastomers Using Ultrasonically Aided Extrusion |
| Liu | Jung-Liang | Ph.D. | 1992 | Does Gel in Nitrile Rubber Affect the Properties of its Blend with Polyvinylchloride? A Fundamental investigation on the Tensile Property, Tear Resistance and Fracture Toughness |
| Liu | Ruofan | M.S. | 2013 | Assessment of Composite Railroad Tie Cracking |
| Liu | Ruofan | Ph.D. | 2018 | A Novel Methodology for Durability Assessment of Rubber Materials |
| Liu | Shan | Ph.D. | 2024 | Advanced Manufacturing with Engineered Living Materials for Sustainable Biocomposites |
| Liu | Xiangyu | M.S. | 2016 | Highly Ordered Phase-separated PS/PMMA Blend Thin Films Structures via Capillary Force Lithography |
| Liu | Xiaoxiao | M.S. | 2015 | UV Laser Treatment of Tire Reinforcing Fibers for Improved Adhesion to Rubber |
| Liu | Xilan | Ph.D. | 2013 | Polymer Photodetectors: Device Structure, Interlayer and Physics |
| Liu | Yanghe | M.S. | 2021 | All Solid-State Supercapacitors with Novel Perovskite Electrolytes |
| Liu | Yawen | M.S. | 2018 | Facile Fabrication of Functional Slippery Polydimethylsiloxane (PDMS) Elastomer |
| Liu | Yuqing | Ph.D. | 2011 | Synthesis and Characterization of Well-Defined, Amphiphilic, Ionic Copolymers |
| Lo | Yi Ting | M.S. | 2019 | Synthesis and Characterization of Deep Eutectic Solvents (DES) with Multifunctional Building Blocks |
| Longanecker | Melanie | Ph.D. | 2017 | Controlling the Microstructure and Kinetics of Block Copolymer Self-Assembly by Direct Immersion Annealing |
| Lopez-Gonzalez | Francisco | M.S. | 1998 | Rheology, Curing Kinetics and Dielectric Analysis of Polymer Concretes |
| Lopez Hallman | Raymond | Ph.D. | 2024 | Enhancing Energy Storage in the Solid Polymer Electrolyte within Li-Ion Batteries and Li-S Batteries |
| Lu | Hui | M.S. | 2001 | The Influence of Excimer Laser Irradiation on the Morphology, Ablation Rate, Thermal Properties, and Ultrasonic Welding Strength of Thermoplastic Polymers |
| Lu | Weijun | M.S. | 2000 | Extrusion Characterization and Melting Mechanism of Thermoplastic Elastomer and Thermoplastics |
| Lu | Xiaoxu | M.S. | 2016 | A Facile Method to Fabricate Versatile Janus Nanoparticles |
| Lu | M.S. | 2013 | Controlled Release of Cyclosporine A from Hydrophobically-Modified Hydrogels | |
| Luo | Tengli | M.S. | 1997 | Rubber/Plastic Blends Based on Ultrasonically Devulcanized Ground Rubber Tire |
| Luo | Xiongyu | M.S. | 2022 | Polymer/Metal Oxide Hybrid Nanostructures from Bottom-up Synthesis and Top-down Nanofabrication |
| Luo | Yan | M.S. | 2014 | Nanoporous Block Copolymer Membranes for Separation and Filtration |
| Lyu | Min-Young | Ph.D. | 1997 | Theoretical and Experimental Studies of a Buss Kneader |
| Ma | Jianxing | M.S. | 2016 | Towards 3D Printing of Thermoplastic Shape Memory Polymers |
| Ma | Yubing | M.S. | 2016 | Contraction of Weak Polyelectrolyte Multilayers in Response to Organic Solvents |
| Ma | Zhihao | M.S. | 2019 | Novel Materials as Electrode and Electrolyte for All-Solid-State Supercapacitors |
| McClanahan | Eric | Ph.D. | 2017 | Modification and Enhancement of Epoxide Coatings via Elastomeric Polysulfides, Self-Assembled Nanophase Particles, Functional Sol-Gels, and Anti-Corrosion Additives |
| Mackura | Mark | M.S. | 2013 | Nano-confinement Effects on the Glass Transition of a Coarse-grained Polymer Melt |
| Madan | Sanjeev | Ph.D. | 1989 | Plastic Deformation and Recovery of Semi-Crystalline Polymers |
| Maffei | Mario | M.S. | 2006 | Characterization of Foaming Phenomena of Polypropylene Filled with Azodicarbonamide and Silica |
| Mahanth | Satishkumar | M.S. | 1993 | Processing-Structure-Property Relationships in Melt Spun Poly (vinylidene flouride)/ Poly(methyl methacrylate) Blends |
| Mangalara | Jayachandra Hari | Ph.D. | 2017 | Control of Polymer Glass Formation Behaviour using Molecular Diluents and Dynamics Interfaces |
| Mao | Jingyi | M.S. | 2019 | Study of Solute Uptake in Polyelectrolyte Coacervate: Influence of Phase Behavior and Chemical Crosslinking to Produce Stable Encapsulating Drops |
| Marin Angel | Juan | Ph.D. | 2021 | Development of Ion-Containing Polymers and Study of Their Molecular, Mechanical, and Flexoelectric Properties |
| Marquina | Edgar | M.S. | 2010 | Use of Dynamic Mechanical Testing, EACS and SEM Image Analysis to Study the Properties of Polypropylene/Calcium Carbonate Nanocomposites |
| Martins | Carla | Ph.D. | 2004 | Mechano Optical Behavior of PET and PEN Under Linear and Programmed Deformation Rate Profiles |
| Matkar | Rushikesh | Ph.D. | 2007 | Phase Diagrams and Kinetics of Solid-Liquid Phase Transitions in Crystalline Polymer Blends |
| Mawhinney | Kaitlyn | Ph.D. | 2020 | Design and Characterization of Emulsion-templated Macroporous-Mesoporous Polyurea Gels and Aerogels |
| Meenakshisundaram | Venkatesh | Ph.D. | 2018 | Elucidating Physics of Sequence-Specific Polymers and the Glass Transition via Evolutionary Computational Design |
| Mehr | Hamideh | Ph.D. | 2019 | Application of High-Performance Polyimides in Additive Manufacturing and Powder Coating |
| Mehta | Atul | M.S. | 1990 | Self-Reinforced Fiber Composites of PEEK and Thermotropic Liquid Crystalline Polymer |
| Mehta | Rujul | Ph.D. | 2003 | Spatio-Temporal Growth of Polymer Single Crystals, Hedites and Spherulites During Isothermal Crystallization |
| Meksupha | Pawiga | M.S. | 1996 | Miscibility Study of Halogen Flame Retardant Polymer Blends |
| Melnikov | Alexei | Ph.D. | 2010 | Damage and Fatigue in Cross-linked Rubbers |
| Meng | Lei | Ph.D. | 2015 | Organic/Inorganic Hybrid Coatings for Anticorrosion |
| Meng | Scott | Ph.D. | 2004 | Phase Equilibria and Morphology Development in Liquid Crystal/Photo-Curable Monomer Mixtures Undergoing Pattern Photo-Polymerization |
| Meng | Tianyu | M.S. | 2015 | E-beam Evaporated TiOx as the Electron Transfer Layer for Perovskite Hybrid Solar Cells |
| Merling | Weston | Ph.D. | 2018 | Investigating the Effects of Interfacial Features on Nanoscale Confined Polymer Systems |
| Merriman | Stephen | Ph.D. | 2024 | Characterization of Polymer Interfaces Using Vibrational Spectroscopy |
| Miller | Kent | Ph.D. | 2012 | Production of Poly(lactic acid) Biodegradable Films and the Introduction of a Novel Initiation Method for Free Radical Polymerization via Magnetic Fields |
| Miller | Ronald | M.S. | 1991 | Polyethyl Acrylate Viscoelastic Characterization, Interaction with Carbon Black, and Heat Aging of Vulcanizates |
| Mishra | Ratan | Ph.D. | 2012 | Simulation of Interfaces in Construction Materials: Tricalcium Silicate, Gypsum, and Organic Modifiers |
| Mitra Aravind | Arpita | M.S. | 2000 | Rheological, Kinetic and Chemorheological Studies of Gum SBR Compound |
| Modi | Arvind | Ph.D. | 2016 | Direct Immersion Annealing of Block Copolymer Thin Films |
| Modic | Michael | M.S. | 1986 | Self-Reinforced Melt Processible Polymer Composites |
| Montes | Sergio | Ph.D. | 1991 | Rheology and Processing of Carbon Black Compounds |
| Moon | Chae-Woo | Ph.D. | 1999 | Kinetic and Rheological Studies of Silica Filled SBR Compounds |
| Mu | Shenglong | M.S. | 2016 | A Real-time Study on Mechano-optical Properties of Chitosan during Film Formation and Processing |
| Mukherjee | Partha | M.S. | 1989 | Phase Transformations in Hydroxypropyl Cellulose |
| Mulligan | Jake | Ph.D. | 2004 | Non-Linear Stress Optical Behavior of Poly L-Lactic Acid and its Nanocomposites During Stretching/Relaxation/Retraction from Amorphous Precursors |
| Nagaraj | Phaniraj | M.S. | 2003 | A Study of the Factors Affecting Performance of Layered Silicate Nanocomposites Using Styrene-Co-Acrylonitrile model Polymer System |
| Nah | Chang-Woon | Ph.D. | 1995 | Wear Mechanisms of Rubber Compounds |
| Nalawade | Priyanka | Ph.D. | 2015 | Alkyd-based High-solid and Hybrid Organic Coatings |
| Nallapaneni | Asritha | Ph.D. | 2020 | Biomimetic Non-Iridescent Structural Colors via Phase-Separation of Compatibilized Polymer Blend Films |
| Nam | Joonhyun | Ph.D. | 1993 | Phase Transitions in a Thermotropic Copolyester and Phase Behavior of its Blends |
| Nanjudiah | Kumar | M.S. | 2003 | Development of Phototonic Crystals Induced by Pattern Photo-Polymerization via Holographic Interface Technique |
| Narayan | Kiran | M.S. | 1998 | A Unified Approach to Mechanical Adhesion by Finite Element Analysis of Straight Sections |
| Narute | Suresh | Ph.D. | 2022 | Highly Ion Conductive Polymer Electrolyte Networks for Energy Storage Applications |
| Nebioglu | Ahmet | Ph.D. | 2006 | Network Formation and Thermo-Mechanical Properties of Photo-Curing Inorganic/Organic Hybrid Coatings |
| Negandhi | Nishant | M.S. | 2003 | The Use of Eximer Laser in Evaluation of Processing Effects in Injection Molded PET and PBT |
| Niemeyer | Matthew | M.S. | 1989 | Processing-Structure-Property Relationships in Cool Rolled PEEK Poly(ether ether Ketone) and PPS Poly(p-phenylene Sulfide) |
| Niknezhad | Sepideh | Ph.D. | 2017 | Strategic Design of Nanofiber Carriers for Drug Release |
| Niknezhad | Setareh | Ph.D. | 2013 | Ultrasonically Assisted Single Screw Extrusion, Film Blowing and Online Film Casting of LLDPE/Clay and PA6/Clay Nanocomposites |
| Nirantar | Prasad | M.S. | 2001 | Optimization of Adhesively Bonded Single Lap Joints by Tapering of Adherends |
| Norton | Edward | M.S. | 2019 | Steady State and Dynamic Oscillatory Shear Properties of Carbon Black Filled Elastomers |
| Nugay | Isik Isil | Ph.D. | 2014 | Polyurethanes in Rigid and Flexible Electronics Novel Hybrid Processing Techniques and Real-Time Monitoring of Material Properties |
| Nwabunma | Domasius | M.S. | 1996 | Development of Birefringence-Free Optical Adhesives Via Optical Anisotropy Compensation : Blends of Reactive Copolymer and Homopolymer |
| Nwabunma | Domasius | Ph.D. | 1999 | Photopolymerization-Induced Phase Separation and Morphology Development in Liquid Crystal/Polymer Blends |
| Offenbach | Ido | Ph.D. | 2016 | Mechano Optical Behavior of Novel Polymers for Capacitor Application during their Processing Cycles |
| Oh | Jeong-Seok | Ph.D. | 2003 | Applications of Powerful Ultrasound to Thermoplastic Elastomers and Rubbers |
| Okuno | Shigeki | Ph.D. | 1996 | Solvent-Dependent Plateau Modulus and Time-Dependent Dynamic Moduli of Plasticized Polymer Containing Multiple-Branched Molecules |
| Opalko | Robert | M.S. | 2008 | Mechanisms of Nanoparticle Induced Morphology Development in Immiscible Blends of Polypropylene/Polystyrene |
| Osanaiye | Gabriel | Ph.D. | 1994 | On the Rheological Properties of Suspensions, Filled Thermoplastics and Rubber Compounds |
| Oshiro | Tadashi | M.S. | 1999 | Application of the Ginzburg-Landau Theory to Polymer Crystallinization |
| Ou | Xuesong | Ph.D. | 2004 | Structural Mechanisms as Revealed by Real Time Mechano Optical Behavior of Polylactic Acid Films in Uni and Biaxial Deformation and Heat Setting Processes |
| Ou-Udomying | Boonharn | M.S. | 1993 | Development of High-Impact Polyamide Molding Resin, Blend of Nylon-66 with Poly(ethyl acrylate) Rubber |
| Ozisik | Rahmi | M.S. | 1996 | Phase Behavior and Structure Development in Melt Spun PEEK/PEI Blends |
| Ozturk | Ozgu | M.S. | 2004 | Optimization of Thermoplastic Impregnation of Glass Rovings with Pultrusion |
| Pable | Hrishikesh | M.S. | 2024 | Microscopic Dynamics and Macroscopic Rheology of Soft Particle Glasses |
| Pan | Shuyang | M.S. | 2016 | Z-Alignment of Halloysite Nanotubes in Norland 65 |
| Panchal | Jatin | M.S. | 1999 | Influence of Composition on Deformation Behavior in Blends of PEEK and PEI |
| Pande | Mumu | M.S. | 1999 | Wear Rate Investigation and Wear Particle Characterization of Silica-Silane and Carbon Black Reinforced Rubber |
| Pantoja | Marcos | Ph.D. | 2019 | Compounding and Processing Approaches for the Fabrication of Shape Memory Polymers |
| Paramonov | Pavlo | Ph.D. | 2005 | Theoretical Modeling of the Nanostructure Formation in Soft Condensed Matter Using Atomic Force Microscopy |
| Park | Dongkyu | M.S. | 1992 | Single Phase Blends of Bisphenol a Polycarbonate and Poly(Phenyl Methacrylate) |
| Park | Dongsik | Ph.D. | 2008 | Self-Assembled Patterns of Block Copolymer/Homopolymer Blends |
| Park | Ho-Sung | Ph.D. | 1990 | Fundamental Studies on Processing, Characterization & Properties of Poly-p-phenylene Terephthalamide/Polyamides Molecular & Particulate |
| Park | Jong-Hyun | Ph.D. | 2004 | A Study on Nanocomposites of Epoxy-Clay and Epoxy-Clay-Thermoplastic Polymer Systems |
| Park | Soo Jeoung | Ph.D. | 2008 | Photopolymerization-Induced Crystallization in Relation to Solid-Liquid Phase Diagrams of Blends of Poly(Ethylene Oxide)/ Multi-Functional Acrylate Monomers |
| Parnell | Shane | Ph.D. | 2002 | The Reactive Blending of a Thermoplastic Polyurethane In Situ with Poly(Vinyl Chloride) |
| Patel | Kalpesh | M.S. | 1994 | Thermal and Reaction Induced Phase Separation in Thermoset/Thermoplastic Blends |
| Patel Keskar | Nisha | M.S. | 2000 | Reactive Compatibilization of PBT/PPO Blends Using Low Molecular Weight Epoxies |
| Patil | Ajeeta | M.S. | 2004 | Synthesis and Microfabrication of Aligned Carbon Nanotubes |
| Patil | Renuka | Ph.D. | 2021 | Fabrication of pH Responsive Membranes Using 248 nm KrF Excimer Laser |
| Pattanayak | Asim | Ph.D. | 2005 | Clay-Tethered Thermoplastic Polyurethane Nanocomposites by Bulk Polymerization Methods |
| Pedraza | Erika | M.S. | 2006 | A Study of the Effects of Functionality on Certain Aspects of Cross-Linkable Latex Systems |
| Pellegrene | Brittany | Ph.D. | 2019 | Modification of Alkyd Resins and Seed Oil Based Reactive Diluents for High Performance Coatings |
| Peng | Bohao | M.S. | 2024 | Microstructure, Crystalline Structure and Mechanical Property of Highly Branched Polyethylene |
| Peng | Fang | M.S. | 2014 | Controlling Radial Compositional Gradient in Electrospun Polyacrylonitrile/Silver Composite Fibers using Chemical Solvent Vapor Treatment and Sintering Technique |
| Peng | Fang | Ph.D. | 2018 | Core-Shell Structured Filaments for Fused Filament Fabrication 3D-Printing |
| Perego | Alessandro | Ph.D. | 2022 | Microstructure and Rheology of Vitrimers Using Hybrid Molecular Dynamics and Monte Carlo Simulations |
| Perilla | Jairo | Ph.D. | 2004 | A Study of the Relationship Between the Morphology and Rheology of Immiscible Polymer Blends with Temporal Changes in the Interfacial Area |
| Pitia | Emmanuel | Ph.D. | 2012 | Composite Proton Exchange Membrane Based on Sulfonated Organic Nanoparticles |
| Pole | Sandeep | Ph.D. | 2019 | Constitutive Modeling of the Rheological Behavior of Rubber Compounds and Plastic Composites |
| Popa Stilke | Morgan | M.S. | 2016 | Diffusive and Deformation Behavior of Physically Crosslinked Hydrogels |
| Pratiwada | Chaitanya | M.S. | 2012 | High Fidelity Detection of Defects in Polymer Films Using Surface-Modified Nanoparticles |
| Prieto | Alberto | M.S. | 2001 | Wood Flour Composites of High Temperature Polymers by Reaction Induced Phase Separation |
| Puatrakul | Tithinun | Ph.D. | 2000 | Studies of Ionic Conductivity of Uniaxially Stretched Polymer Electrolytes Films |
| Puttarudraiah | Amrutheswar | M.S. | 2003 | Upgrading Recycled Waste Stream Polyethylene by Modification with Nanoscale Clay Hybrids |
| Qian | Jiajie | M.S. | 2014 | Control of C60-POSS Nanoparticle Location in Directed Self-Assembly of Block Copolymer Thin Films |
| Qian | Jin | M.S. | 2018 | Swelling and Plasticization of Polymeric Binders by Li-Containing Carbonate Electrolytes Using Quartz Crystal Microbalance with Dissipation |
| Qiang | Zhe | M.S. | 2013 | Morphology Control in Mesoporous Carbon Films Using Solvent Engineering |
| Qiang | Zhe | Ph.D. | 2016 | Simple, Generalized Method to Highly Aligned Block Copolymer Films: Solvent Vapor Annealing with Shear |
| Qiu | Jialin | M.S. | 2015 | Synthesis of High Molecular Weight Poly (methyl methacrylate by Activators Regenerated by Electron Transfer Atom Transfer Radical Polymerization |
| Qu | Cheng | Ph.D. | 2013 | Novel Polymer Electrolyte Membranes for Ni-Zn Battery |
| Quade | Derek | Ph.D. | 2017 | Investigation of Interfacial Bonding Between Shape Memory Alloys and Polymer Matrix Composites |
| Rahman | Tamanna | Ph.D. | 2020 | Interfacial Effects on Rheological Response of Nanoconfined Polymers |
| Rajaraman | Hariharan | M.S. | 1992 | Effect of Fillers on the Spin Welding Behavior of Poly-p-phenylene Sulfide Resins |
| Rajgarhia | Stuti | Ph.D. | 2016 | Control of Morphology and Diameter of Bicomponent Polymeric Nanofibers with Applications in Filtration |
| Rajput | Pankaj | M.S. | 2003 | Long Term Migration Effects on the Pull-Out Strength of Silver Wire Embedded in an Adhesive Matrix |
| Ramanujam | Anand | M.S. | 1998 | Phase Behavior and Vulcanization Induced Phase Separation in Blends of Syndiotactic PP and Ethylene Propylene Diene Terpolymer |
| Ramezani-Dakhel | Hadi | Ph.D. | 2015 | Bioengineered Metal Nanoparticles: Shape Control, Structure, and Catalytic Functionality |
| Ramirez-Huerta | Mayela | M.S. | 2004 | Influence of Blend Composition on Structure Development During Uniaxial Stretching of Poly(vinyl chloride)/Poly(e-Caprolactone) |
| Ramirez-Huerta | Mayela | Ph.D. | 2009 | Steric and Anchimeric Effects on the Hydrolysis of Oligoesters and their Influence on End-Use Polyurethane Coatings |
| Randall | Jason | Ph.D. | 2010 | Tailoring Structure Property Relationships and Elastic Phenomenon in Native and Polymer Reinforced Silica Aerogels |
| Rathi | Pankaj | Ph.D. | 2009 | Theoretical Modeling of Morphology Development in Blends of Semicrystalline Polymers Undergoing Photopolymerization |
| Raut | Prasad | Ph.D. | 2017 | Towards Development of Polymeric Compounds for Energy Storage Devices and for Low Energy Loss Tires |
| Razzaghi-Kashani | Mehdi | M.S. | 1997 | Analytical Simulation of Mechanical Processes of Wear for Rubber Vulcanizates |
| Razzaghi-Kashani | Mehdi | Ph.D. | 2000 | A Numerical Approach Towards Understanding the Mechanism of Fatigue Wear in Tread Vulcanizates During Rolling of Tires |
| Reagan | Michael | M.S. | 2009 | Electric Charging and Nanostructure Formation in Polymeric Films Using Combined Amplitude-Modulated Atomic Force Microscopy Assisted Electrostatic Nanolithography and Electric Force Microscopy |
| Ren | Tianli | M.S. | 2017 | Fabrication and Evaluation of Electrochemical Performance of Solid Polymer Electrolyte Membrane for Lithium-Ion Battery |
| Ren | Xianjie | M.S. | 2016 | Use of Fly Ash as Eco-friendly Filler in Synthetic Rubber for Tire Applications |
| Rendon Piedrahita | Camilo | Ph.D. | 2018 | Study of Highly Conductive, Flexible Polymer Electrolyte Membranes and their Novel Flexoelectric Effect |
| Rhee | Sangkeun | Ph.D. | 2000 | Structure Development of Polyamides (=Nylons) in Film Extrusion and Stretching Processes |
| Riley | Stephen | Ph.D. | 2024 | Impact of Pyrolyzed Soybean Hull Filler Interactions on High Density Polyethylene and Nylon-6 Composites |
| Rottmayer | Christopher | M.S. | 2004 | Optimization of Epoxy Bonding to Granite Based on Fracture Considerations |
| Roy | Sayantan | Ph.D. | 2011 | Polyhedral Oligomeric Silsesquioxane-Sorbitol Non-Covalent Interactions: Effects on the Reinforcement of Isotactic Polypropylene Spun Fibers |
| Ruan | Dihui | M.S. | 2015 | Glass Formation Behavior of Model Ionomers |
| Sadeghi | Mohammad | M.S. | 1987 | Effect on Plasticizer type on Gelation and Fusion Behavior of Polyvinyl Chloride Plastisol |
| Saifee Valsadwala | Abbas | M.S. | 2023 | Understanding the Crystallinity of Carbon Black and its Effects on Filled Rubber Compounds |
| Salata | Ryan | Ph.D. | 2017 | Modified Alkyds for High Solids Coatings and Adhesives |
| Saldanha Singh | Jeanne | M.S. | 1987 | Phase Separation Phenomena in Polymer Blends: Mechanisms and Controlled Morphology |
| Salunke | Namrata | Ph.D. | 2018 | Self-Assembly of Functional Amphiphilic Triblock Copolymer Thin Films |
| Samant | Saumil | Ph.D. | 2016 | Directed Self-assembly of Block Copolymers for High Energy Density Polymer Film Capacitors |
| Sanghvi | Mukesh | M.S. | 1991 | Rheology and Instabilities of Extrusion Coating Process |
| Satam | Sayali | Ph.D. | 2018 | Optimization of Wet Friction Systems Based on Rheological, Adsorption, Lubricant and Friction Material Characteristics |
| Sau | Madhusudan | Ph.D. | 2003 | Morphology Development in Chaotic Mixing of Polymers |
| Sawwan | Hussain | Ph.D. | 2024 | Perovskite Solar Cells Incorporated with Processing Additives |
| Scavuzzo | Robert | M.S. | 1993 | Computer Simulation of the Filling and Post Filling Stages of the Injection Molding Cycle of a Rubber Compound |
| Schaal | Stephane | Ph.D. | 2000 | The Study and the Prediction of the Rheology and Processing of Tire Compounds |
| Schaible | Stephen | M.S. | 1992 | Investigations into Instrumented Spin Welding and Vibration Weldin of Poly(vinylidene) Fluoride |
| Schaner | Jason | M.S. | 2018 | The Impact of Nanoclay Addition on PVC Pressure-Sensitive Digital Printed Films |
| Schauber | David | M.S. | 2002 | The Behavior of Filament-Wound Carbon Fiber/Epoxy Composite Tubes Under Axial Compression |
| Schmidt | Ryan | M.S. | 2011 | Magnetic Nanoparticle Field Directed Self-Assembly: Magnetic Flux Line Mapping and Block Copolymer Driven Assembly |
| Scobbo | James | M.S. | 1986 | Behavior of Gum Elastomers and Carbon Black-Filled Compounds in Shear and Elongational Deformation: Effect of Gel, Filler and Elastomer Type |
| Scobbo | James | Ph.D. | 1989 | Rheology, Processing and Mechanical Properties of Thermoplastic/Graphite Fiber Composites |
| Seif | Sylvain | Ph.D. | 2009 | Temporally Programmed Stretching of Polymer Films: Influence of Nanoparticles |
| Sen | Taner | Ph.D. | 2003 | Investigation of Dynamics and Structure Development During Uniaxial Stretching of PET Films at Different Molecular Weights Using Fully Automated Spectral Birefringence Technique |
| Sepulveda-Medina | Pablo | Ph.D. | 2021 | Ice Inhibition Properties of Supramolecular Hydrogels |
| Seo | Junyoung | Ph.D. | 2019 | D-Glucaric Acid Based Polymers and Crosslinkers: Polyesters Bearing Pendent Hydroxyl Groups and Dissolvable Chemically Crosslinked Gels |
| Serhatkulu | Toprak | Ph.D. | 2000 | Crystallization and Birefringence Studies on Fast Structural Changes Followed by Non-Contact Spectral Birefringence and Raman Spectroscopy Techniques |
| Severe | Geralda | Ph.D. | 1999 | Characterization and Development of New Hydrogenated Acrylonitrile-Butadiene Rubber Blends |
| Seylar | Joshua | Ph.D. | 2022 | Scalable Synthesis of Helicenes: Enabling the Application of Helicenes to Next-Generation Materials |
| Shah | Jayesh | M.S. | 1991 | Continuous Filament Reinforced Thermoplastics for Automative Body Panels |
| Shah | Ketan | Ph.D. | 1987 | Characterization of Phase Behavior and Deformation Mechanisms of Polybutadienes, Styrene-Butadiene Copolymers and their Blends |
| Shah | Nilay | M.S. | 2023 | Investigation on 3D-Printing of Homopolymer Polypropylene |
| Shah | Nipesh | M.S. | 1999 | Study of Interfacial Adhesion and Injection Molding of Liquid Crystalline Polymer Blends |
| Shah | Nirav | M.S. | 2001 | Design and Filament Winding of Composite Shield for Jet Engine Fan Blade Containment |
| Shah | Sachin | M.S. | 1992 | Influence of Injection Molding Variables on the Mechanical Properties of Filled PBTP Using a Statistical Design of Experiment |
| Shams Es-Haghi | Siamak | Ph.D. | 2015 | Mechanics of Tough Chemically Cross-Linked Hydrogels |
| Shan | Haifeng | Ph.D. | 2006 | Structure Development in Melt Spinning, Cold Drawing and Cold Compression of Poly(ethylene-co-octene) with Different Octene Content) |
| Shang | Jihui | M.S. | 2013 | Effect of Carbon Nanotube on Fabrication of Single-component and Bi-component Nanofibers by Gas Jet Method |
| Shen | Chungsea | Ph.D. | 1995 | Phase Equilibrium and Phase Separation Dynamics in Polymer Dispersed Liquid Crystals |
| Shen | Lening | Ph.D. | 2024 | High-Performance Perovskite Solar Cells Based on Novel Metal Halide Perovskites |
| Shen | Lening | M.S. | 2021 | High-Performance Perovskite Solar Cells by Active Layer Composition Engineering |
| Shen | Liyang | M.S. | 2015 | Real-Time Mechanical and Mechano-Electrical Behavior of Carbon Black Filled Films |
| Shen | Naifu | M.S. | 2021 | Macromolecular Engineering and Additive Manufacturing of Poly(styrene-b-isobutylene-b-styrene) (SIBS) |
| Shi | Ying | Ph.D. | 2013 | High Temperature Shape Memory Polymers and Ionomer Modified Asphalts |
| Shieh | Woei-Jian | M.S. | 1990 | Processability of Silica Filled Compounds |
| Shim | Sang Eun | Ph.D. | 2002 | Ultrasound Devulcanization of Silica Filled Silicone Rubber: Processing, Property and Molecular Aspects |
| Shimojo | Kenichi | M.S. | 1993 | Characterization of Strain-Induced Crystallization in Relation to Injection Molding of Thermoplastics |
| Shin | James | M.S. | 2013 | Shape Memory Elastomers and Fatty Acid Organogels: Functional Materials from Small Molecule Additives |
| Shin | Jin-Woong | Ph.D. | 2003 | The Effect of Processing Parameters on Pressure Development, Gas Penetration Length and Residual Wall Thickness in Gas Assisted Injection Molding |
| Shin | Kyung Chul | M.S. | 1989 | Influence of Carbon Black on Extrudate Swell and Shrinkage in Rubber Compounds |
| Shin | Kyung Chul | Ph.D. | 1994 | A Basic Study of a Pin Barrel Screw Extruder |
| Shinko | Andrew | Ph.D. | 2015 | Structure and Morphology Control in Polymer Aerogels with Low Crosslink Density |
| Shockey | Frederick | M.S. | 1996 | Relaxation Modulus Approximation with Fractional Calculus |
| Shon | Keungjin | Ph.D. | 2003 | Mixing Studies in Modular Intermeshing Co-Rotating Twin Screw Extruder, Modular Counter-Rotating Twin Screw Extruder, Buss Kneader and Kobelco Nex-T Continuous Mixer |
| Shyu | Goang-Ding | Ph.D. | 1993 | Birefringence and Residual Stresses in Molded Articles of Amorphous Polymers |
| Silin | Maxim | Ph.D. | 2002 | Some Problems of Polymer Flows in Channels and Dies |
| Simhambhatla | Murthy | M.S. | 1990 | Fundamental Studies on Biaxial Stretching, Plasma Treatment, and Vacuum Metallization of Poly(ether ether ketone) (peek) Films |
| Simhambhatla | Murthy | Ph.D. | 1994 | The Rheological Modeling of Simple Flows of Unfilled and Filled Polymers |
| Simmons | Sean | M.S. | 1999 | Optimization of Adhesively Bonded Single Lap Joints by Adherend Notching |
| Singh | Gurpreet | Ph.D. | 2013 | Dynamic Thermal Field-Induced Directed Self-Assembly of Block Copolymer Thin Films |
| Smith | Scott | Ph.D. | 2018 | Resolving the Molecular Origins of Reinforcement in Filled Elastomers using Molecular Simulation |
| Sobani | Masoud | Ph.D. | 2018 | Smart Flexible Anticorrosion Coating |
| Sobhanie | Mohammed | M.S. | 1996 | Rheological Models for Particle Filled Polymers |
| Sohn | Min-Seok | M.S. | 1989 | Characterization of Rotational Molding Resin Powders and Study of Structure-Property of Rotationally Molded Sample |
| Song | Chang Hoon | M.S. | 1994 | Phase Separation and Electro-Optical Properties of Polymer Dispersed Liquid Crystal Films |
| Song | Chang Hoon | Ph.D. | 1999 | Self-Reinforced Composites of Polyesters and PET/HBA Based LCP |
| Song | Han Jong | M.S. | 1987 | Die Extrusion of Rubber Compounds : Flow Patterns and Extrudate Character |
| Song | Kwangjin | Ph.D. | 1998 | Structure Development of Polyester and their Blends in Film Formation Processes |
| Song | Lin | Ph.D. | 2010 | Chemical Modification of Starch and Preparation of Starch-based Nanocomposites |
| Song | Sang-Sub | Ph.D. | 1990 | Fundamental Study of Structure Development and Processing in Polycondensate Compounds |
| Soundarrajan | Prabhu | M.S. | 2003 | Electrochemical Devices Based on Conducting Polymers and Aligned Carbon Nanotubes |
| Sridhar | Siddhamalli | M.S. | 1998 | Toughening of Epoxy/Thermoplastic Composites via Reaction Induced Phase Separation |
| Sridharan | Harini | M.S. | 2020 | Coupled Dynamics of Heat Transfer and Fluid Flow in Shear Rheometry |
| Srinivasan | Ashok | M.S. | 1992 | Nonlinear Modeling of Melt Flow Instability |
| Stadler | Michael | M.S. | 2004 | Viscoelastic Properties of Unreinforced and Reinforced Plastic Lumber |
| Su | Wen-Yi | M.S. | 1993 | In-situ Copolymerization and Compatibilization of Polyester and Polystyrene Blends |
| Subramaniam | Pazampalacode | M.S. | 1993 | Blends and Composites of a Liquid Crystal Polymre with an Engineering Thermoplastic |
| Sudhindrakumar | Guruprasad | M.S. | 2003 | A Novel Economical Method to Improve the Toughness of CArbon/Epoxy Long Fiber Components by the Integration of Glass Tow Loops Core |
| Suh | Chang Ho | Ph.D. | 1995 | Rheology and Processing of Talc Filled Thermoplastics |
| Suh | Jaein | Ph.D. | 2007 | Comparative Structure Development of Various Polyolefins in Injection Molding Process |
| Suh | Kenneth | M.S. | 1991 | Fundamental Studies of Flow of Elastomers and Thermoplastics and Their Blends in an Internal Mixer, and Their Properties |
| Sujan | Brijesh | M.S. | 2005 | Revulcanization of Ultrasonically Devulcanized Tire Rubber: Cure Kinetics and Physical Properties |
| Sun | Mingze | M.S. | 2021 | Digital Light Processing 3D Printing of Reconfigurable Reprintable Ion-Crosslinked Shape Memory Polymer |
| Sun | Weicheng | M.S. | 2018 | Use of Torrefied Sorghum as Eco-Friendly Filler in Styrene Butadiene Rubber |
| Sun | Ximei | Ph.D. | 2007 | The Devulcanization of Unfilled and Carbon Black Filled Isoprene Rubber Vulcanizates by High Power Ultrasound |
| Sun | Yan | Ph.D. | 2016 | Controlled Morphology in Bulk Heterojunction Polymer and Perovskite Solar Cells |
| Sundarapandian | Senthil Kumar | M.S. | 1993 | Viscoelastic Characterization of Poly(ethyl acrylate) |
| Sunthonpagasit | Nongnard | M.S. | 2000 | Improving Ultrasonic Weld Strength of Polypropylene by Joint Design, Polar Additives, and by the Methods of Excimer Laser, and Solvent Treatment |
| Suppiah | Giritharan | M.S. | 2002 | Effects of Plasticizers with Various Molecular Weight and Structure on Properties of Polyvinyl Chloride and its Blend with Polyurethane |
| Suri | Atul | M.S. | 1999 | Electrical Conductivity and Characterization of Polypropylene and Chemically Modified Polypropylenes Filled with Copper Powder |
| Swaminathan | Suresh | M.S. | 1988 | Thermoplastic Fiber-Reinforced Composites Based on Liquid Crystalilne Polymers |
| Tandel | Vijay | M.S. | 1994 | Miscibility and Conductivity of Polyethylene Oxide and Polypropylene Oxide Blends Complexed With a Copper Salt |
| Tang | Kangli | M.S. | 2015 | Study of Genistein/Epoxidized Natural Rubber (ENR) Blends and its Application for Poly(vinyl chloride) (PVC) Plasticization |
| Tangvigitsakul | Pattarasai | Ph.D. | 2015 | Methoxy Poly(ethylene glycol) Methacrylate-based Copolymers on the Applications of Concrete Admixtures, Mesoporous Materials, and Rheology Modifiers |
| Tapale | Mayuresh | M.S. | 1998 | Continuous Ultrasonic Devulcanization of Unfilled Natural Rubber Vulcanizates |
| Teli | Samar | M.S. | 2002 | Stress States and Interference in Double Adhesive Layer Scarf and Butt Joints |
| Teo | Nicholas | Ph.D. | 2019 | Nano, Micro and Macro Scale Control of Porous Aerogel Morphology |
| Thakkar | Hemant | M.S. | 2003 | The Morphology, Rheology and Processing of Thermoplastic Vulcanizates and Their Nanocomposites |
| Thomas | Jomin | Ph.D. | 2023 | Towards Polymer Sustainability via the Development of Sustainable Thermosets and Composites from Norbornylized Seed Oils, and Assessment of Environmental Impact of Tires |
| Thongtan | Roungrong | M.S. | 2006 | Morphological Study of Compatibilization of Immiscible Polymer Blends Using a Functionalized Block Copolymer |
| Tiwari | Ankit | Ph.D. | 2018 | Fabrication of Temperature Responsive Membranes using 248 Nanometer Krypton Flouride Excimer Laser |
| Trivedi | Meeta | Ph.D. | 2022 | Towards the Development of Polymeric Materials for Lithium-Ion and Post-Lithium-Ion Technology |
| Tsai | Cheng-Han | M.S. | 2023 | Flexible Optical Materials by Molecular Engineering and Integration of Perovskite Quantum Dots and Thermoplastic Elastomers |
| Tsai | Hsien-Yin | M.S. | 1992 | The Deformation and Instability of Phase Morphology of Fluoroelastomer and Polycarbonate Blends |
| Tsai | Hsien-Yin | Ph.D. | 1995 | Functionalization of Polystyrene and Low Density Polyethylene and Their Reactive Blending With Polyethylene Terephthalate |
| Tse | Joseph | M.S. | 1989 | Processing-Structure-Property Relationships in Biaxially stretched Poly (Butylene Terephthalate)/Poly(Ethylene Isophthalae) Blends |
| Ulcer | Yakup | Ph.D. | 1995 | Injection Molding of Slowly Crystallizing Polymers |
| Unsal | Emre | Ph.D. | 2013 | Integrated Real Time Studies to Track All Physical and Chemical Changes in Polyimide Film Processing: From Casting to Imidization |
| Vadhar | Parimal | M.S. | 1985 | Co-Crystallization and Miscibility Studies of Ultra-High Molecular Weight Polyethylene Blends |
| Vaidya | Nitin | Ph.D. | 1999 | Rheology, Phase Behavior and Morphology of Blends Containing Diblock Copolymer |
| Valladares | David | M.S. | 2002 | Real Time Strain Induced Crystallization and Structural Hierarchy Time Evolution in Crosslinked Natural Rubber |
| Van Sweden | Chadwick | M.S. | 2000 | Effect of Processing Conditions on Microstructure and Mechanical Properties of Injection Molding of Polypropylenes of Various Molecular Weights |
| Varkey | Joseph | Ph.D. | 1999 | Industrial and Scientific Significance of Polymer-Solvent Interaction Through Viscoelastic Properties |
| Varma | Rajesh | M.S. | 1997 | Miscibility Studies of Blends of Block Copolymers and Asphalt |
| Varma | Tilak | M.S. | 1991 | Blends of Thermoplastics Polyamides and a Lliquid Crystal Polymer |
| Venkateswaran | Hari | M.S. | 1992 | A Fast Dual Wavelength Optical Technique to Study Crystallization in Pre-Oriented PET Films |
| Viswanathan | Ravishankar | M.S. | 1994 | Mixing, Injection Molding and Lamination of Liquid Crystal Polymer Blends |
| Vongpanish | Pratum | Ph.D. | 2000 | Engineering Polymer Blends Based Upon Phenolic-Modified Polyolefins |
| Vorontsov | Sergey | Ph.D. | 2015 | Rheology of Ionomers |
| Wadley | Maurice | Ph.D. | 2011 | Synthesis and Morphology Characterization of Polydimethylsiloxane-Containing Block Copolymers |
| Walker | Eric | M.S. | 2000 | Effect of Fillers on Ultrasonic Welding of Polypropylene |
| Wan | Min | Ph.D. | 1995 | Injection Molding of Rubber Compound with Rheology Affected by Vulcanization |
| Wang | Chao | Ph.D. | 2018 | Effect of Reversible Crosslinks on Nanostructure and Properties of Supramolecular Hydrogels |
| Wang | Chi | Ph.D. | 1992 | Fracture Mechanics of Model Fiber composites |
| Wang | Dongbiao | Ph.D. | 2005 | In-Line Monitoring and Analysis of Polymer Melting Behavior in an Intermeshing Counter-Rotating Twin-Screw Extruder by Ultrasound Waves |
| Wang | Enmin | M.S. | 2013 | A Real Time Study on the Mechanoptical Properties of Polyvinyl Alcohol: Effect of Water |
| Wang | Enmin | Ph.D. | 2017 | Photo-Curable Electrical Contact Stabilization Materials |
| Wang | Kai | M.S. | 2014 | Magnetic Nanoparticles and Magnetic Effects Induced Novel Anode Buffer Layer for Polymer Solar Cells |
| Wang | Kai | Ph.D. | 2017 | High Performance Solution-processed Perovskite Hybrid Solar Cells through Device Engineering and Novel Materials |
| Wang | Haoran | M.S. | 2016 | Preparation Titanium Oxide/Epoxy Hybrid Anticorrosive Coating |
| Wang | Lei | M.S. | 1998 | Reactive Processing for Enhancement of Adhesion of Polypropylene with Acidic Monomers |
| Wang | Min-Diaw | M.S. | 1989 | Processing-Structure-Property Relationships in Biaxially Stretched and Tubular Blown Thermoplastic Elastomer Films |
| Wang | Qianhe | M.S. | 2013 | Investigation of Acrylated Alkyd |
| Wang | Qianhe | Ph.D. | 2016 | Acrylated Alkyds |
| Wang | Qiaoyun | M.S. | 2020 | Hydrophobically Modified Polyelectrolytes to Tune Properties of Coacervates |
| Wang | Shiping | M.S. | 2019 | Thickness and Crystallinity Dependent Swelling of Poly(ethylene oxide)/Poly(methyl methacrylate) Blend Films |
| Wang | Siyang | M.S. | 2016 | Role of Amphiphilic Block Copolymer Composition on Pore Characteristics of Micelle-templated Mesoporous Cobalt Oxide Films |
| Wang | Xiao | Ph.D. | 2013 | Tailoring of Pore Structures and Surface Properties of Syndiotactic Polystyrene Aerogels |
| Wang | Xiaojiang | Ph.D. | 2012 | Polyester Based Hybrid Organic Coatings |
| Wang | Xiaoteng | M.S. | 2016 | Directed Nano-patterning of Polymer Nanocomposite Thin Films |
| Wang | Xiaoteng | Ph.D. | 2019 | Nanoimprinting Directed Assembly of Polymer-Grafted Nanoparticles in Polymer Thin Films |
| Wang | Xueyuan | Ph.D. | 2012 | Control and Characterization of Textured, Hydrophobic Ionomer Surfaces |
| Wang | Yeh | Ph.D. | 1988 | Analysis and Computer-Aided Design of Extrusion Dies for Shaping of Rubber Compounds |
| Wang | Yi | M.S. | 2014 | Synthesis and Characterization of Amphiphilic Poly(ethylene oxide)-Block Poly(octadecyl acrylate) Block Copolymers |
| Wang | Yundong | Ph.D. | 1996 | Processing-Structure-Property Relationships in Injection Molded PVDF and Blends of PVDF and PMMA |
| Wang | Zixin | M.S. | 2017 | Towards High-Performance Perovskite Solar Cells by Cathode Interfacial Engineering with Ternary Metal Oxide and Device Engineering with Bulk Heterojunction |
| Wang Cordry | Shanshan | Ph.D. | 2007 | Development of Polymer Electrolytes of Polyurethane and Polyether Modified Polysiloxane Blends with Lithium Salts |
| Wei | Chunding | M.S. | 2017 | High-Performance Asymmetric Supercapacitors Mainly Based on Metal Chalcogenide Compounds Electrode Materials |
| Weinheimer Deaver | Emily | Ph.D. | 2020 | Processing of Novel 3D Printing Materials and Facilitation of 3D Printing for Enhanced Mechanical and Structural Stability |
| Weisen | Albree | M.S. | 2021 | Thermorheological Dynamics of Glycerol-Based Colloidal Silica Suspensions |
| Wen | Shihao | M.S. | 2016 | Design of Multi-drug Release Coaxial Electrospun Mat Targeting Infection and Inflammation |
| Wiener | Clinton | Ph.D. | 2017 | Physically Crosslinked Hydrogels: Impact of Interfaces and Stress on Structure and Properties |
| Wong | Chang Min | Ph.D. | 1990 | The Effects of Sound and Ultrasound Oscillations upon Polymer Extrusion |
| Woods | Rochelle | M.S. | 1992 | Instrumented Compaction of Polymer Powders and Processing Structure Property Relationships |
| Wu | Chonggang | Ph.D. | 2006 | Transesterification, Mechanical Properties and Rheology of Blends of Thermoplastic Polyester and Model Thermotropic Polyester |
| Wu | Dezhen | M.S. | 2018 | Magnetic Field Effects Induced by Incorporation of Magnetic Nanoparticles on Bulk Heterojunction Polymer Solar Cells |
| Wu | Jiawei | M.S. | 2015 | Physical Properties of Blends of Triblock Copolymer (SEBS) with Low Molar Mass Liquid Crystals |
| Wu | Jinping | Ph.D. | 2013 | Investigation of Radiation Crosslinking Styrenic Block Copolymers and Maleimide-Terminated Imide Oligomers |
| Wu | Jong-Pyo | Ph.D. | 1991 | A Unified View of Polymer Chain Orientation in Complex Orientation State |
| Wu | Leyao | M.S. | 2019 | Effect of PET Support Membrane Thickness on Water Permeation Behavior at Thermally Responsive PNIPAM-g-PET Membranes |
| Wu | Xinchi | M.S. | 2019 | Covalently Crosslinked Coacervates with Enhanced Stabilization and Salt Partitioning in Complex Coacervates |
| Wu | Yijie | M.S. | 2024 | High Voltage Stable Fluorinated Plasticizer Added Solid State Electrolyte for Lithium Ion Battery |
| Wu | Zhenghao | M.S. | 2018 | Investigating the Effects of Grafting and Chain Stiffness on Nano-confined Polymers using Molecular Dynamics Simulation |
| Wutticharoenwong | Kosin | Ph.D. | 2007 | Bio-Based Reactive Diluents and Thiol-Ene Photopolymerization for Environmentally Benign Coatings |
| Xia | Xuhui | Ph.D. | 2020 | Tuning Porous Structure through Cooperative Assembly with Solvent Composition and Microwave Heating |
| Xie | Kefu | M.S. | 1992 | Development of an In-Situ Curemeter |
| Xie | Shaoxiong | M.S. | 2018 | Comparative Study on TIP/TIA/ZRP/TEOS Modified Epoxy Resin: Anti-Corrosion Performance |
| Yingsheng | Ph.D. | 2011 | Finite Element Analysis of Drop Deformation in the Entrance Region of a Cylindrical Tube | |
| Xu | Haijun | Ph.D. | 2004 | Effect of Self Generated Thermal Field on Spatio Temporal Growth of Hierarchical Structures During Polymer Crystalization |
| Xu | Jingli | M.S. | 2000 | The Kinetics of Crystallization and Vulcanization Induced Phase Separation in Miscible Blends of Low Density Polyethylene and Ethylene Propylene Diene Terpolymer |
| Xu | Lihua | M.S. | 2015 | Layer-by-Layer Directed Self-Assembly of Polyelectrolyte Multilayers with Foaming Structures |
| Xu | Rongcheng | M.S. | 2017 | Anticorrosion UV Curable Alkyds |
| Xu | Shengyi | M.S. | 2017 | Computational Insight into Kinetic Control of Star Polymer Structure and Properties |
| Xu | Tong | M.S. | 2014 | UV-Curable Hybrid Polyurethanes |
| Xue | Jiachen | M.S. | 2013 | Control of Long Range Orientation in Ordered Mesoporous Carbon Thin Films |
| Yalcin | Baris | Ph.D. | 2004 | The Role of Clay Nanoparticles on the Development of Structural Hierarchy in Injection Molding of Nylon 6 and Uniaxial Stretching of Poly(vinyl chloride) |
| Yan | Han | Ph.D. | 2011 | Electrospinning-Derived Carbon/Graphite Nanofiber Mats from a Polyimide-Mesophase Pitch Blend Precursor for Flexible Thermal Management Thin Films |
| Yandek | Greogory | Ph.D. | 2005 | Experimental and Theoretical Investigations of Polymerization-Induced Phase Separation in Modified Epoxy Composite Materials and Photonic Crystals |
| Yang | Chen | M.S. | 2017 | Photomultiplication Effect in Organic and Quantum Dots Photodetector and Device Structural Modification |
| Yang | Jen-Chang | M.S. | 1989 | Miscibility Studies of Nafion Perflourinated Ionomer and Polyvinylidene Fluoride Blends |
| Yang | Jen-Chang | Ph.D. | 1992 | Miscibility and Phase Transformations in Rigid Rod Molecular Composities |
| Yang | Jinhai | Ph.D. | 2008 | Phase Morphology and Orientation Development of Polymer Blends in Melt Processing |
| Yang | Junhong | M.S. | 2017 | Glass Formation Behavior and Ionic Conductivity of Ionic Liquids and Polymeric Ionic Liquid: Insight from Molecular Simulation |
| Yang | Kumin | M.S. | 1995 | Effects of Shear Flow and Annealing on Morphology of Rapidly Precipitated Immiscible Polymer Blends |
| Yang | Mo | M.S. | 2016 | Synthesis and Characterization of Halatopolymers by Reversible Addition Fragmentation Chain Transfer (RAFT) Polymerization |
| Yang | Muxuan | M.S. | 2021 | Molecular Engineering of Polyaniline with Ultrathin Polydopamine and Monolayer Graphene for All-Solid-State Flexible Micro-Supercapacitors |
| Yang | Shaoguang | M.S. | 2014 | Design and Investigation of Polyurethane End-Capped Polyesters with Controlled Hydrolytic Stability |
| Yang | Yiming | M.S. | 2016 | Tough Stretchable Physically-crosslinked Hydrogel Fiber Mats from Electrospun Statistical Copolymers |
| Yang | Yongrui | M.S. | 2020 | Quasi-Solid-State Flexible Supercapacitors with Novel Gel Electrolytes |
| Yang | Zhiyi | Ph.D. | 2007 | Rheology of Miscible Polymer Blends with Hydrogen Bonding |
| Yao | Yimin | M.S. | 2020 | Polymeric Porous Aerogel Monoliths and Aerogel Microparticles Synthesized from Oil-in-Oil Emulsions |
| Ye | Changhuai | Ph.D. | 2016 | Microstructure Alignment and Mechanical Properties of Block Copolymer and Crystalline Polymer Thin Films |
| Ye | Pin | M.S. | 1993 | Adhesion of Crosslinked Polyethylene |
| Yi | Chao | M.S. | 2013 | Towards High Performance Polymer Solar Cells through Interfacial Engineering |
| Yi | Chao | Ph.D. | 2016 | Solution Processed Polymeric Thermoelectrics and Photovoltaics |
| Yoon | Pil Joong | Ph.D. | 1999 | Effect of Thermal History on the Rheology of Thermoplastic Polyurethanes |
| Yoon | Yeo Cheol | M.S. | 1991 | Structure Development in Rolled Poly(Vinylidene Fluoride) Sheets |
| Youn | Yeo-O | Ph.D. | 2004 | Structure-Morphology-Rheology Relationships in Thermopastic Polyurethanes |
| Yu | Liqun | M.S. | 2000 | Injection Welding |
| Yu | Yishan | Ph.D. | 2000 | Structure Development in Melt Processing Isotactic Polypropylene, Polypropylene Blends/Compounds and Dynamically Vulcanized Polyolefin TPES |
| Yuan | Chuqing | M.S. | 2018 | Topographic Pattern Directed Phase Separation in PAN/PMMA Blend Thin Films |
| Yuan | Hongyi | Ph.D. | 2014 | Structures and Properties of Polymer Nanocomposite Sub-Micron Thin Films |
| Yucel | Orcun | Ph.D. | 2013 | Real Time Birefringence Gradient Development during Drying of Solution Cast Functional Films and their Mechanical, Optical and Gas Barrier Properties |
| Yue | Peijing | M.S. | 2019 | Electrochemical Characterization and Evaluation of Flexoelectric Performance of Polymer Electrolyte Composite |
| Yun | Jushik | Ph.D. | 2003 | Recycling of Waste Tires and EPDM Rubbers Using High Power Ultrasonic Devulcanization |
| Yun | Seunghee | Ph.D. | 1994 | Fiber-Matrix Adhesion in Single Fiber Model Composites |
| Zha | Weibin | Ph.D. | 2006 | Organoclay Nanocomposites Based on Vinylpyridine-Containing Block Copolymers |
| Zhai | Chunhao | M.S. | 2016 | Polyimide Aerogels and their Applications in Removal of Airborne Nanoparticles |
| Zhai | Qingpu | M.S. | 1994 | Air Lubricated Die for Rubber Extrusion |
| Zhan | Chi | M.S. | 2018 | Towards Development of Porous Polymeric Materials for Oil Absorption and Energy Storage Devices |
| Zhang | Baosen | M.S. | 2019 | Solution-Processed Broadbank Bulk Heterojunction Perovskite Photodetectors |
| Zhang | Chao | M.S. | 2018 | Thickness Limit for Alignment of Block Copolymer Films using Solvent Vapor Annealing with Shear |
| Zhang | Cheng | M.S. | 2017 | Pigmented Polyurethane/Polysiloxane Hybrid Coatings for Corrosion Protection |
| Zhang | Chi | M.S. | 2015 | Anti-Icing and Drop Impact Behavior on Lubricant Infused Polyelectrolyte Multilayer Surfaces |
| Zhang | Chi | Ph.D. | 2019 | Development of Functional Slippery Liquid Infused Surfaces with Enhanced Lifetime for Large Scale Productions |
| Zhang | Huan | M.S. | 2014 | Properties and Structures of Sulfonated Syndiotactic Polystyrene Aerogel and Syndiotactic Polystyrene/Silica Hybrid Aerogel |
| Zhang | Huan | Ph.D. | 2018 | Effects of Solution Composition (Salts, pH, Dielectric Constant) on Polyelectrolyte Complex (PEC) Formation and their Properties |
| Zhang | Linkun | M.S. | 2015 | Mechano-Optical Behaviors of Ionomers |
| Zhang | Longhe | Ph.D. | 2014 | Supramolecular Block Copolymers via Ionic Interactions |
| Zhang | Mengxue | M.S. | 2019 | Influence of Sodium Salts on the Swelling and Rheology of Hydrophobically Crosslinked, Non-Ionic Hydrogels Determined by QCM-D |
| Zhang | Ren | M.S. | 2013 | Dynamic Temperature Gradient Directed Self-assembly of Block Copolymer/Nanoparticle Thin Films |
| Zhang | Ren | Ph.D. | 2016 | Directed Self-organization of Polymer-grafted Nanoparticles in Polymer Thin Films |
| Zhang | Wenjin | M.S. | 2000 | Inverse Gas Chromatographic Studies of the Filler-Filler and Filler-Rubber Interactions |
| Zhang | Xiao | M.S. | 2014 | Novel Approaches for Nanocomposites Preparation and Characterization |
| Zhang | Xiao | Ph.D. | 2018 | Probing Polymer Dynamics using High Throughput Dielectric Spectroscopy |
| Zhang | Xiuyuan | M.S. | 2019 | Perovskite Solar Cells with Restricted Photocurrent Hysteresis by Ionic and Polymeric Additives |
| Zhang | Xuan | M.S. | 2016 | Polymer Films with Enhanced Through Thickness Optical Transmission and Compression Modulus with Electric Field Aligned Glass Fiber/Bubbles |
| Zhang | Yuanzhong | M.S. | 2014 | Relationship between Crosslinking and Ordering for the Fabrication of Soft Templated Mesoporous Carbon Thin Films |
| Zhang | Yuanzhong | Ph.D. | 2018 | Surface Interactions of Soft Interfacial Materials |
| Zhang | Yue | M.S. | 2017 | Phase Separation of Polymer-grafted Nanoparticle Blend Thin Films |
| Zhang | Zeyang | M.S. | 2016 | Interfacial Free Radical Polymerization of Maleic and 1,4-cyclohexanedimethyanol Divinyl Ether |
| Zhang | Zhan | M.S. | 2015 | Effect of Interfacial Reengineering and Molecular Structure on Polymer Solar Cells |
| Zhao | Mengmeng | Ph.D. | 2019 | Polyelectrolyte Complex Coacervation: Selective Solute Uptake, Tunable Rheological Properties and Applications |
| Zhao | Shujing | M.S. | 2013 | Core-shell Nanofiber Assemblies Containing Ionic Salts |
| Zhao | Tianxin | M.S. | 2016 | Silk Based Porous Microneedle Array for Programmable Drug Delivery |
| Zhao | Wei | Ph.D. | 2011 | Flexible Transparent Electrically Conductive Polymer Films for Future Electronics |
| Zhao | Zhiyang | M.S. | 2014 | Reactive Extrusion Synthesis of Ionomers |
| Zhao | Zhiyang | Ph.D. | 2018 | Ionomers and their Composites as Shape Memory Polymers in Films and 3D Printing |
| Zheng | Luyao | Ph.D. | 2020 | Solution-Processed Hybrid Perovskites for Photovoltaics and Thermoelectrics |
| Zheng | Luyao | M.S. | 2017 | High Efficient Inverted Perovskite Hybrid Solar Cells with Interfacial Engineering of Hole Transport Layer by A Radical Polymer and a Novel Cadmium Doped Perovskite Active Layer |
| Zheng | Qiang | M.S. | 1990 | Phase Transformations in Thermotropic Liquid Crystalline Copolyesters and Realted Polymer Blends |
| Zheng | Yimeng | M.S. | 2014 | Evaluation of Tung Oil Based Reactive Diluents for Alkyd Coating using Experimental Design |
| Zhong | Jing | Ph.D. | 2016 | Ultrasonically Aided Extrusion in Preparation of Polymer Composites with Carbon Fillers |
| Zhong | Weijie | M.S. | 2015 | The Effect of Hydrophilic Monomer in Core-shell Latex |
| Zhong | Yingfan | M.S. | 2016 | Layer-by-layer Rose Petal Mimic Surface for Oil/Water Separations |
| Zhou | Jianguo | Ph.D. | 2007 | Processing of Generic Circuits by Conductive Adhesives: Geometrical and Rheological Considerations |
| Zhou | Lei | M.S. | 2019 | Investigation of the Shape Memory Behaviour of Stearic Acid Swollen, Crosslinked EPDM Elastomers |
| Zhou | Ming | Ph.D. | 2006 | Synthesis, Characterization, Phase Behavior and Rheology of Combined Main-Chain/Side-Chain Liquid-Crystalline Polymers |
| Zhou | Suyuan | M.S. | 2019 | High Performance Perovskite Solar Cells by Interface Engineering and Bulk Heterojunction Device Structure |
| Zhou | Xixian | Ph.D. | 1998 | Processing-Structure-Property Relationships in Uni- and Biaxially Stretched Binary and Ternary Blends |
| Zhou | Yi | M.S. | 2019 | Phase Behavior of Oppositely Charged Strong Polyelectrolyte Pairs and Weak Polyelectrolyte Pairs, and Properties of Corresponding Complexes |
| Zhu | Geyunjian | M.S. | 2018 | Fabrication of Slippery Liquid-infused Porous Surfaces using Layer-by-Layer Assembly: Towards Multifunctional Surfaces and Facile Fabrication Processes |
| Zhu | Guangchong | M.S. | 1994 | Structure, Rheology and Mechanical Properties of Kaolin/Polyamide 6 In-Situ Composites and their Blends with Conventional Polyamides |
| Zhu | Tao | M.S. | 2018 | Room Temperature Operated Solution-Processed Near-Infrared Photodetectors |
| Zhuang | Ping | M.S. | 1987 | Fundamental Studies on Blends of a Thermotropic Aromatic Polyester Liquid Crystal with Thermoplastics |
| Zook | Christopher | Ph.D. | 2000 | Investigation into the Dynamic Behavior of an Injection Molding Non-Return Valve |
| Zou Matthews | Kunrong | M.S. | 2004 | Organic-Inorganic Hybrid Coatings Based on Cycloaliphatic Linseed Oil Epoxide |
| Zou | Yu | M.S. | 2019 | Use of Pyrolyzed Soybean Hulls as Eco-Friendly Reinforcement Filler in Styrene Butadiene Rubber |
| Zuo | Yuchen | M.S. | 2018 | Thermal Behaviors and NMR Investigations of Ionic Liquids under Different Degrees of Confinement |