Advanced Mold Flow Simulation - 2 Day Course

Course Number: AP3432
Date: 04/22/2019 - 04/23/2019
Time: 8:00 AM - 4:00 PM
Location: Akron Polymer Training Center, Akron, OH 44325-5404
Cost: $1,400 USD
Online Registration
CEU's: 1.5
Instructor: Mr. Rob Hickman

Course Overview

  1. Introduction to Plastics – Overview with Simulation in Mind
  2. Reasoning behind Simulating Plastics – Knowing what matters
  3. Industry Leading Injection Molding Analysis Software
    1. Moldflow Insight software
    2. Moldex3D Professional software
    3. Sigma soft
    4. Others (i.e. Advisers, Solid works Plastics, etc.)
  4. Differences between a Standard and Advanced Analysis
    1. Principles
    2. Goals / Objectives
    3. Analysis Preparation
    4. Solution / Solve Characteristics
    5. Interpreting Results Accurately
    6. Leveraging Manufacturing based Experience (knowing fact from fiction)

Instructor Biography:

hickman-webMr. Hickman is a graduate Mechanical Engineer with over 30 years of polymer engineering experience in the field. In addition, Robert has received advanced Polymer Engineering training from various institutions including the University of Akron (one of the top 10 polymer engineering universities in the nation). His education further includes certifications in marketing from Cleveland State University, I.T. certifications from Edison Community College, Mold flow Corporation, Coretech Systems, CTRL Systems, AC Technologies, Ohio CAE Services, University of Akron Polymer Training Center, and the Solidworks Corporation.

Robert has significant hands-on experience with productivity programs, product design, concurrent development and optimization, finite element analysis, various CAD/CAM/CAE softwares and Lean/Six Sigma principles (Green Belt) in the manufacturing sector.

A significant portion of Mr. Hickman’s experience in the polymer industry was obtained on the manufacturing floor, directing a problem-solving environment. In addition to his hands-on experience, Mr. Hickman has taught polymer related courses at the University of Akron (APTC), participated in several beta testing programs for well-known softwares such as I-deas (now NX), Solidworks, C-Mold and Moldex3D. For several years, Mr. Hickman served as the Global Plastic Simulation Special Interest Group Chairman for the I-deas user group known as ICCON and served on the board of the Society of Manufacturing Engineers (Plastics Tooling Division).

Lab Exercises

  1. Importing Geometry / Model Clean up
  2. Setting meshing size (making good choices on size and how it affects results)
  3. Runner layouts (types, procedures, pros/cons)
  4. Cooling layouts (types, procedures, pros/cons)
  5. Analysis set up (experienced based settings, software suggestions and tricks for good results)
  6. Solving
  7. Post Processing and Result Interpretation (filling, packing, cooling, webpage, fiber, various other types)
    1. Being successful using experience
    2. Detailed discussions of what results are really telling you
  8. Graduation
  9. Certificates / Awards
  10. Wrap-up & Dismiss